Re: [PATCH 1/2] ARM: dts: STi: Fix aliases property name for STi boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob

On 03/05/2018 04:28 PM, Rob Herring wrote:
> On Mon, Mar 5, 2018 at 9:00 AM,  <patrice.chotard@xxxxxx> wrote:
>> From: Patrice Chotard <patrice.chotard@xxxxxx>
>>
>> Since dtc v1.4.6-9-gaadd0b65c987, aliases property name must
>> be lowercase only.
>> This allows to fix following warnings when compiling dtb
>> with W=1 option :
> 
> I'm so glad to see fixes before the dtc update landed in the kernel tree!

;-)

> 
>> arch/arm/boot/dts/stih418-b2199.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
>> arch/arm/boot/dts/stih407-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
>> arch/arm/boot/dts/stih410-b2260.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
>> arch/arm/boot/dts/stih410-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxx>
>> ---
>>   arch/arm/boot/dts/stih407-b2120.dts | 4 ++--
>>   arch/arm/boot/dts/stih410-b2120.dts | 4 ++--
>>   arch/arm/boot/dts/stih410-b2260.dts | 4 ++--
>>   arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
>>   4 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
>> index c8ad905d0309..fa1186af6574 100644
>> --- a/arch/arm/boot/dts/stih407-b2120.dts
>> +++ b/arch/arm/boot/dts/stih407-b2120.dts
>> @@ -14,7 +14,7 @@
>>          compatible = "st,stih407-b2120", "st,stih407";
>>
>>          chosen {
>> -               bootargs = "console=ttyAS0,115200 clk_ignore_unused";
>> +               bootargs = "console=ttyas0,115200 clk_ignore_unused";
> 
> The kernel change for this is an ABI breakage both DT <-> kernel and
> kernel <-> userspace.
> 
> Really, if you are okay with doing this, you should change it to ttySx IMO.

OK i will use serialN instead

> 
>>                  linux,stdout-path = &sbc_serial0;
> 
> And since you have this, you don't even need the console praram.

Ok, i will remove stdout-path in an additional patch

> 
>>          };
>>
>> @@ -24,7 +24,7 @@
>>          };
>>
>>          aliases {
>> -               ttyAS0 = &sbc_serial0;
>> +               ttyas0 = &sbc_serial0;
> 
> The correct fix is use "serialN" for aliases.

Ok

> 
> I have a check for only known alias names which would give a better
> warning, but David thought it was too restrictive.
> 
>>                  ethernet0 = &ethernet0;
>>          };
>>


Thanks

Patrice��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux