Hi Michel,
On Mon, Feb 26, 2018 at 1:18 PM, Michel Pollet
<michel.pollet@xxxxxxxxxxxxxx> wrote:
> This adds the Renesas RZ/N1 CPU and bare bone support.
>
> This currently only handles generic parts (gic, architected timer)
> and a UART.
> This also relies on the bootloader to set the pinctrl and clocks.
>
> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
Thanks for your patch!
This should be split in separate patches:
> Documentation/devicetree/bindings/arm/shmobile.txt | 3 +-
1. DT bindings
> arch/arm/boot/dts/rzn1.dtsi | 94 +++
2. SoC DTS file
> arch/arm/mach-shmobile/Kconfig | 5 +
3. Platform Kconfig symbol
> arch/arm/mach-shmobile/Makefile | 1 +
> arch/arm/mach-shmobile/setup-r9a06g032.c | 60 ++
Please no more board files for new platforms (see below).
> .../dt-bindings/interrupt-controller/rzn1-irq.h | 137 ++++
DTS files are much easier to compare with the datasheet if the interrupt
numbers are present in the DTS files theirselves.
> include/dt-bindings/soc/renesas,rzn1-map.h | 173 +++++
Same for base addresses.
> --- a/Documentation/devicetree/bindings/arm/shmobile.txt
> +++ b/Documentation/devicetree/bindings/arm/shmobile.txt
> @@ -47,7 +47,8 @@ SoCs:
> compatible = "renesas,r8a77980"
> - R-Car D3 (R8A77995)
> compatible = "renesas,r8a77995"
> -
> + - RZ/N1D (R9A06G032)
> + compatible = "renesas,r9a06g032"
BTW, are R9A06G032NGBG and R9A06G032VGBA the same SoC,
just in different packages?
> --- /dev/null
> +++ b/arch/arm/boot/dts/rzn1.dtsi
So faw we always named the SoC-specific DTS files after the SoC part
number => r9a06g032.dtsi.
> @@ -0,0 +1,94 @@
> +/*
> + * Base Device Tree Source for the Renesas RZ/N1 SoC
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/rzn1-irq.h>
> +#include <dt-bindings/soc/renesas,rzn1-map.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "renesas,r9a06g032";
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <1>;
> + };
> + };
> + aliases {
> + serial0 = &uart0;
> + };
> + arm_timer: timer {
> + compatible = "arm,armv7-timer";
> + arm,cpu-registers-not-fw-configured;
> + interrupts =
> + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_LOW)>;
> + };
> + gic: interrupt-controller@RZN1_GIC_BASE {
On-SoC devices should be grouped under an "soc" node.
You can move the "interrupt-parent = <&gic>;" there, too.
> + compatible = "arm,cortex-a7-gic";
As the RZ/N1D's User's Manul refers to the GIC-400 manuals, I assume
this is a GIC-400 => "arm,gic-400".
You can check by reading the GIC_DIST_IIDR register.
> + reg = <0x44101000 0x1000>, /* Distributer */
> + <0x44102000 0x1000>, /* CPU interface */
Shouldn't the size of the second region be 0x2000?
> + bus {
Oh, you do have an "soc" node. Please call it "soc".
> --- /dev/null
> +++ b/arch/arm/mach-shmobile/setup-r9a06g032.c
> @@ -0,0 +1,60 @@
> +/*
> + * RZ/N1 processor support file
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>, <buserror@xxxxxxxxx>
> + *
> + */
> + /* SPDX-License-Identifier: GPL-2.0 */
> +
> +#include <asm/mach/arch.h>
> +#include <dt-bindings/soc/renesas,rzn1-map.h>
> +#include <linux/kernel.h>
> +#include <linux/io.h>
> +#include <linux/of_platform.h>
> +#include <soc/rzn1/sysctrl.h>
> +
> +static void __iomem *sysctrl_base_addr;
> +
> +static void rzn1_sysctrl_init(void)
> +{
> + if (sysctrl_base_addr)
> + return;
> + sysctrl_base_addr = ioremap(RZN1_SYSTEM_CTRL_BASE,
> + RZN1_SYSTEM_CTRL_SIZE);
These values should be obtained from DT.
> + BUG_ON(!sysctrl_base_addr);
> +}
> +
> +void __iomem *rzn1_sysctrl_base(void)
> +{
> + if (!sysctrl_base_addr)
> + rzn1_sysctrl_init();
> + return sysctrl_base_addr;
> +}
> +EXPORT_SYMBOL(rzn1_sysctrl_base);
Looks like this is a "system controller", providing a bunch of registers
to a collection of random functionality, to be used by various drivers.
Please see:
Documentation/devicetree/bindings/mfd/syscon.txt
include/linux/mfd/syscon.h
drivers/mfd/syscon.c
> +static void rzn1_restart(enum reboot_mode mode, const char *cmd)
> +{
> + rzn1_sysctrl_writel(
> + rzn1_sysctrl_readl(RZN1_SYSCTRL_REG_RSTEN) |
> + BIT(RZN1_SYSCTRL_REG_RSTEN_SWRST_EN) |
> + BIT(RZN1_SYSCTRL_REG_RSTEN_MRESET_EN),
> + RZN1_SYSCTRL_REG_RSTEN);
> + rzn1_sysctrl_writel(
> + rzn1_sysctrl_readl(RZN1_SYSCTRL_REG_RSTCTRL) |
> + BIT(RZN1_SYSCTRL_REG_RSTCTRL_SWRST_REQ),
> + RZN1_SYSCTRL_REG_RSTCTRL);
> +}
This should be a reset driver under drivers/power/reset/.
Or perhaps you can even do without a driver, check
Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
> --- /dev/null
> +++ b/include/soc/rzn1/sysctrl.h
> @@ -0,0 +1,736 @@
> +/*
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + * All rights reserved.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD)
Not mentioned in Documentation/process/license-rules.rst
Do you mean any of:
SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
or something different?
> +/*
> + * Get the base address for the sysctrl block.
> + * Ensure use does not conflict with anything else that acesses the SYSCTRL
> + */
> +void __iomem *rzn1_sysctrl_base(void);
> +
> +static inline u32 rzn1_sysctrl_readl(u32 reg)
> +{
> + BUG_ON(reg >= RZN1_SYSTEM_CTRL_SIZE);
Please no BUG_ON().
> + return readl(rzn1_sysctrl_base() + reg);
> +}
> +
> +static inline void rzn1_sysctrl_writel(u32 value, u32 reg)
> +{
> + BUG_ON(reg >= RZN1_SYSTEM_CTRL_SIZE);
> + writel(value, rzn1_sysctrl_base() + reg);
> +}
Probably all of this can be removed if you use the syscon abstraction.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
