Hi Linus and Stefan, thanks for the tips. This series adds support for generic binding for pinctrl bcm2835 driver, and add the code for set output buffer of a pin using the output-low and output-high generic properties. Tested on Raspberry Pi Zero W, based on bcm2835 SoC. Matheus Castello (3): pinctrl: bcm2835: switch to GENERIC_PINCONF pinctrl: bcm2835: Add support for generic pinctrl binding pinctrl: bcm2835: Add support for output-low output-high properties drivers/pinctrl/bcm/Kconfig | 1 + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 88 +++++++++++++++++++++++------------ 2 files changed, 60 insertions(+), 29 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
