Re: [PATCH v2 8/8] arm64: zynqmp: Add support for Xilinx zc1751

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Fri, Feb 23, 2018 at 03:40:30PM +0100, Michal Simek wrote:
> Xilinx zc1751 boards is used for silicon validation. Board can be
> extended with 5 FMCs/DCs cards to connect various IPs. Describe all
> these combinations.
> 
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
> 
> Changes in v2:
> - Record compatible string to xilinx.txt
> 
>  Documentation/devicetree/bindings/arm/xilinx.txt   |   3 +
>  arch/arm64/boot/dts/xilinx/Makefile                |   5 +
>  .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts    | 133 +++++++++++++++
>  .../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    | 170 +++++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts    | 153 +++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts    | 181 +++++++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts    | 126 ++++++++++++++
>  7 files changed, 771 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
> index aceccf2bf43b..0cf6fb61631d 100644
> --- a/Documentation/devicetree/bindings/arm/xilinx.txt
> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt
> @@ -28,6 +28,9 @@ Additional compatible strings:
>  - Xilinx internal board zc1275
>    "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275"
>  
> +- Xilinx internal board zc1751
> +  "xlnx,zynqmp-zc1751"
> +
>  - Xilinx 96boards compatible board zcu100
>    "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100"
>  
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index bdda451afaad..c2a0c00272e2 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -3,6 +3,11 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
>  dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> new file mode 100644
> index 000000000000..41f9e987c559
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm015-dc1
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "ZynqMP zc1751-xm015-dc1 RevA";
> +	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> +	aliases {
> +		ethernet0 = &gem3;
> +		gpio0 = &gpio;
> +		i2c0 = &i2c1;
> +		mmc0 = &sdhci0;
> +		mmc1 = &sdhci1;
> +		rtc0 = &rtc;
> +		serial0 = &uart0;
> +		usb0 = &usb0;

Same alias comments.

> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> +	};
> +};
> +
> +&fpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&gem3 {
> +	status = "okay";
> +	phy-handle = <&phy0>;
> +	phy-mode = "rgmii-id";
> +	phy0: phy@0 {
> +		reg = <0>;
> +	};
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	eeprom: eeprom@55 {
> +		compatible = "atmel,24c64"; /* 24AA64 */
> +		reg = <0x55>;
> +	};
> +};
> +
> +&rtc {
> +	status = "okay";
> +};
> +
> +&sata {
> +	status = "okay";
> +	/* SATA phy OOB timing settings */
> +	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> +	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> +	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> +	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> +	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> +	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> +	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +};
> +
> +/* eMMC */
> +&sdhci0 {
> +	status = "okay";
> +	bus-width = <8>;
> +};
> +
> +/* SD1 with level shifter */
> +&sdhci1 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> new file mode 100644
> index 000000000000..c4d253cec526
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> @@ -0,0 +1,170 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm016-dc2
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "ZynqMP zc1751-xm016-dc2 RevA";
> +	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> +	aliases {
> +		can0 = &can0;
> +		can1 = &can1;
> +		ethernet0 = &gem2;
> +		gpio0 = &gpio;
> +		i2c0 = &i2c0;
> +		rtc0 = &rtc;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		spi0 = &spi0;
> +		spi1 = &spi1;
> +		usb0 = &usb1;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> +	};
> +};
> +
> +&can0 {
> +	status = "okay";
> +};
> +
> +&can1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&gem2 {
> +	status = "okay";
> +	phy-handle = <&phy0>;
> +	phy-mode = "rgmii-id";
> +	phy0: phy@5 {
> +		reg = <5>;
> +		ti,rx-internal-delay = <0x8>;
> +		ti,tx-internal-delay = <0xa>;
> +		ti,fifo-depth = <0x1>;
> +	};
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	tca6416_u26: gpio@20 {
> +		compatible = "ti,tca6416";
> +		reg = <0x20>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		/* IRQ not connected */
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1339";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&rtc {
> +	status = "okay";
> +};
> +
> +&spi0 {
> +	status = "okay";
> +	num-cs = <1>;
> +
> +	spi0_flash0: spi0_flash0@0 {

flash@0

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "sst,sst25wf080", "jedec,spi-nor";
> +		spi-max-frequency = <50000000>;
> +		reg = <0>;
> +
> +		spi0_flash0@0 {

Don't use underscores.

Also, this is a partition, right? Follow the partitions binding. For 
example, there should be a "partitions" node. And the name should be 
partition@0

> +			label = "spi0_flash0";

This should be something that describes what is in the partition like 
say "rootfs".

> +			reg = <0x0 0x100000>;
> +		};
> +	};
> +};
> +
> +&spi1 {
> +	status = "okay";
> +	num-cs = <1>;
> +
> +	spi1_flash0: spi1_flash0@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
> +		spi-max-frequency = <20000000>;
> +		reg = <0>;
> +
> +		spi1_flash0@0 {
> +			label = "spi1_flash0";
> +			reg = <0x0 0x84000>;
> +		};
> +	};
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb1 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> new file mode 100644
> index 000000000000..9f312ef0e061
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> @@ -0,0 +1,153 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm017-dc3
> + *
> + * (C) Copyright 2016 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +
> +/ {
> +	model = "ZynqMP zc1751-xm017-dc3 RevA";
> +	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> +	aliases {
> +		ethernet0 = &gem0;
> +		gpio0 = &gpio;
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		mmc0 = &sdhci1;
> +		rtc0 = &rtc;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		usb0 = &usb0;
> +		usb1 = &usb1;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> +	};
> +};
> +
> +&fpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-handle = <&phy0>;
> +	phy-mode = "rgmii-id";
> +	phy0: phy@0 { /* VSC8211 */
> +		reg = <0>;
> +	};
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +/* just eeprom here */
> +&i2c0 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	tca6416_u26: gpio@20 {
> +		compatible = "ti,tca6416";
> +		reg = <0x20>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		/* IRQ not connected */
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1339";
> +		reg = <0x68>;
> +	};
> +};
> +
> +/* eeprom24c02 and SE98A temp chip pca9306 */
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +};
> +
> +&rtc {
> +	status = "okay";
> +};
> +
> +&sata {
> +	status = "okay";
> +	/* SATA phy OOB timing settings */
> +	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> +	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> +	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> +	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> +	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> +	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> +	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +};
> +
> +&sdhci1 { /* emmc with some settings */
> +	status = "okay";
> +};
> +
> +/* main */
> +&uart0 {
> +	status = "okay";
> +};
> +
> +/* DB9 */
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
> new file mode 100644
> index 000000000000..c6eb888d7812
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm018-dc4
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +
> +/ {
> +	model = "ZynqMP zc1751-xm018-dc4";
> +	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> +	aliases {
> +		can0 = &can0;
> +		can1 = &can1;

These too should be dropped I think.

> +		ethernet0 = &gem0;
> +		ethernet1 = &gem1;
> +		ethernet2 = &gem2;
> +		ethernet3 = &gem3;
> +		gpio0 = &gpio;
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		rtc0 = &rtc;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> +	};
> +};
> +
> +&can0 {
> +	status = "okay";
> +};
> +
> +&can1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&lpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy0>;
> +	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
> +		reg = <0>;
> +	};
> +	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
> +		reg = <7>;
> +	};
> +	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
> +		reg = <3>;
> +	};
> +	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
> +		reg = <8>;
> +	};
> +};
> +
> +&gem1 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy7>;
> +};
> +
> +&gem2 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy3>;
> +};
> +
> +&gem3 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy8>;
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&rtc {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&watchdog0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
> new file mode 100644
> index 000000000000..2422f939ab53
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm019-dc5
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Siva Durga Prasad <siva.durga.paladugu@xxxxxxxxxx>
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "ZynqMP zc1751-xm019-dc5 RevA";
> +	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> +	aliases {
> +		ethernet0 = &gem1;
> +		gpio0 = &gpio;
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		mmc0 = &sdhci0;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> +	};
> +};
> +
> +&fpd_dma_chan1 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> +	status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> +	status = "okay";
> +};
> +
> +&gem1 {
> +	status = "okay";
> +	phy-handle = <&phy0>;
> +	phy-mode = "rgmii-id";
> +	phy0: phy@0 {
> +		reg = <0>;
> +	};
> +};
> +
> +&gpio {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +};
> +
> +&sdhci0 {
> +	status = "okay";
> +	no-1-8-v;
> +};
> +
> +&ttc0 {
> +	status = "okay";
> +};
> +
> +&ttc1 {
> +	status = "okay";
> +};
> +
> +&ttc2 {
> +	status = "okay";
> +};
> +
> +&ttc3 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&watchdog0 {
> +	status = "okay";
> +};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]

  Powered by Linux