* Kishon Vijay Abraham I <kishon@xxxxxx> [180302 08:04]:
> Hi Tony,
>
> On Thursday 01 March 2018 09:20 AM, Tony Lindgren wrote:
> > Let's add support for the GPIO controlled USB PHY on the MDM6600 modem.
> > It is used on some Motorola Mapphone series of phones and tablets such
> > as Droid 4.
>
> Generally PHY configuration is done for the PHYs that is connected to the USB
> controllers in the SoC. In that sense it differs from the usual case by
> programming the PHY in the device.
Yup in this case it's the MDM6600 that provides the PHY for the SoC :)
> > The MDM6600 is hardwired to the first OHCI port in the Droid 4 case, and
> > is controlled by several GPIOs. The USB PHY is integrated into the MDM6600
> > device it seems. We know this as we get L3 errors from omap-usb-host if
> > trying to use the PHY before MDM6600 is configured.
>
> Do you know what phy is connected to the OHCI port. Previously we've seen for
> having USB devices on the board itself, phy less configurations was used.
We have MDM6600 on *HCI port 1 providing "ohci-phy-4pin-dpdm"
PHY for the SoC, so not TLL. Then there's another modem W3GLTE on
port 2 that is using "ehci-tll".
> > --- /dev/null
> > +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
> .
> .
> <snip>
> .
> .
> > +
> > +static int phy_mdm6600_probe(struct platform_device *pdev)
> > +{
> > + struct phy_mdm6600 *ddata;
> > + struct usb_otg *otg;
>
> Since it is connected to a OHCI, not sure if we really need to add usb_otg here.
OK yeah that's copy paste leftover from my earlier PHY driver I used
to start with. Will drop thanks.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
