This series provides the support for turning on the arm-smmu's
clocks/power domains using runtime pm. This is done using the
recently introduced device links patches, which lets the smmu's
runtime to follow the master's runtime pm, so the smmu remains
powered only when the masters use it.
It also adds support for Qcom's arm-smmu-v2 variant that
has different clocks and power requirements.
Took some reference from the exynos runtime patches [1].
After another round of discussion [3], we now finally seem to be
in agreement to add a flag based on compatible, a flag that would
indicate if a particular implementation of arm-smmu supports
runtime pm or not.
This lets us to use the much-argued pm_runtime_get_sync/put_sync()
calls in map/unmap callbacks so that the clients do not have to
worry about handling any of the arm-smmu's power.
The patch that exported couple of pm_runtime suppliers APIS, viz.
pm_runtime_get_suppliers(), and pm_runtime_put_suppliers() can be
dropped since we don't have a user now for these APIs.
Thanks Rafael for reviewing the changes, but looks like we don't
need to export those APIs for some more time. :)
Previous version of this patch series is @ [5].
[v8]
* Major change -
- Added a flag 'rpm_supported' which each platform that supports
runtime pm, can enable, and we enable runtime_pm over arm-smmu
only when this flag is set.
- Adding the conditional pm_runtime_get/put() calls to .map, .unmap
and .attach_dev ops.
- Dropped the patch [6] that exported pm_runtim_get/put_suupliers(),
and also dropped the user driver patch [7] for these APIs.
* Clock code further cleanup
- doing only clk_bulk_enable() and clk_bulk_disable() in runtime pm
callbacks. We shouldn't be taking a slow path (clk_prepare/unprepare())
from these runtime pm callbacks. Thereby, moved clk_bulk_prepare() to
arm_smmu_device_probe(), and clk_bulk_unprepare() to
arm_smmu_device_remove().
- clk data filling to a common method arm_smmu_fill_clk_data() that
fills the clock ids and number of clocks.
* Addressed other nits and comments
- device_link_add() error path fixed.
- Fix for checking negative error value from pm_runtime_get_sync().
- Documentation redo.
* Added another patch fixing the error path in arm_smmu_attach_dev()
to destroy allocated domain context.
[v7]
* Addressed review comments given by Robin Murphy -
- Added device_link_del() in .remove_device path.
- Error path cleanup in arm_smmu_add_device().
- Added pm_runtime_get/put_sync() in .remove path, and replaced
pm_runtime_force_suspend() with pm_runtime_disable().
- clk_names cleanup in arm_smmu_init_clks()
* Added 'Reviewed-by' given by Rob H.
[V6]
* Added Ack given by Rafael to first patch in the series.
* Addressed Rob Herring's comment for adding soc specific compatible
string as well besides 'qcom,smmu-v2'.
[V5]
* Dropped runtime pm calls from "arm_smmu_unmap" op as discussed over
the list [3] for the last patch series.
* Added a patch to export pm_runtime_get/put_suppliers() APIs to the
series as agreed with Rafael [4].
* Added the related patch for msm drm iommu layer to use
pm_runtime_get/put_suppliers() APIs in msm_mmu_funcs.
* Dropped arm-mmu500 clock patch since that would break existing
platforms.
* Changed compatible 'qcom,msm8996-smmu-v2' to 'qcom,smmu-v2' to reflect
the IP version rather than the platform on which it is used.
The same IP is used across multiple platforms including msm8996,
and sdm845 etc.
* Using clock bulk APIs to handle the clocks available to the IP as
suggested by Stephen Boyd.
* The first patch in v4 version of the patch-series:
("iommu/arm-smmu: Fix the error path in arm_smmu_add_device") has
already made it to mainline.
[V4]
* Reworked the clock handling part. We now take clock names as data
in the driver for supported compatible versions, and loop over them
to get, enable, and disable the clocks.
* Using qcom,msm8996 based compatibles for bindings instead of a generic
qcom compatible.
* Refactor MMU500 patch to just add the necessary clock names data and
corresponding bindings.
* Added the pm_runtime_get/put() calls in .unmap iommu op (fix added by
Stanimir on top of previous patch version.
* Added a patch to fix error path in arm_smmu_add_device()
* Removed patch 3/5 of V3 patch series that added qcom,smmu-v2 bindings.
[V3]
* Reworked the patches to keep the clocks init/enabling function
separately for each compatible.
* Added clocks bindings for MMU40x/500.
* Added a new compatible for qcom,smmu-v2 implementation and
the clock bindings for the same.
* Rebased on top of 4.11-rc1
[V2]
* Split the patches little differently.
* Addressed comments.
* Removed the patch #4 [2] from previous post
for arm-smmu context save restore. Planning to
post this separately after reworking/addressing Robin's
feedback.
* Reversed the sequence to disable clocks than enabling.
This was required for those cases where the
clocks are populated in a dependent order from DT.
[1] https://lkml.org/lkml/2016/10/20/70
[2] https://patchwork.kernel.org/patch/9389717/
[3] https://patchwork.kernel.org/patch/10204925/
[4] https://patchwork.kernel.org/patch/10102445/
[5] https://lkml.org/lkml/2018/2/7/144
[6] https://patchwork.kernel.org/patch/10204945/
[7] https://patchwork.kernel.org/patch/10204925/
Sricharan R (3):
iommu/arm-smmu: Add pm_runtime/sleep ops
iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device
iommu/arm-smmu: Add the device_link between masters and smmu
Vivek Gautam (2):
iommu/arm-smmu: Destroy domain context in failure path
iommu/arm-smmu: Add support for qcom,smmu-v2 variant
.../devicetree/bindings/iommu/arm,smmu.txt | 42 +++++
drivers/iommu/arm-smmu.c | 199 +++++++++++++++++++--
2 files changed, 230 insertions(+), 11 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
