DT nodes should be named according to the type of object that they
represent rather than the identity. DT nodes that contain a reg
property should include a unit address in their name. Fix these issues.
Signed-off-by: Stephen Warren <swarren@xxxxxxxxxxxxx>
---
This is the bcm2835 patch which depends on patch 1. I guess this could
also go through the clk tree if that makes it easier, although there's
always the small risk of conflicts if you do that.
arch/arm/boot/dts/bcm2835.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index a2d4889..1cf1ae7 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -155,21 +155,21 @@
#address-cells = <1>;
#size-cells = <0>;
- clk_mmc: mmc {
+ clk_mmc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <100000000>;
};
- clk_i2c: i2c {
+ clk_i2c: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <250000000>;
};
- clk_spi: spi {
+ clk_spi: clock@2 {
compatible = "fixed-clock";
reg = <2>;
#clock-cells = <0>;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
