This patchset adds support for STMicroelectronics STM32 USB PHY Controller (USBPHYC) which is embedded in STM32MP1 SoC. The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI switch that selects either USB OTG controller or USB Host controller for the second PHY port. --- Changes in v2: * Update diagram to better describe the context. * Change boolean dt propery st,port2-switch-to-host into u32 st,utmi-switch. * Silent phy creation failure in case of -EPROBE_DEFER. Amelie Delaunay (2): dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC) phy: stm32: add support for STM32 USB PHY Controller (USBPHYC) .../devicetree/bindings/phy/phy-stm32-usbphyc.txt | 46 +++ drivers/phy/st/Kconfig | 14 + drivers/phy/st/Makefile | 1 + drivers/phy/st/phy-stm32-usbphyc.c | 382 +++++++++++++++++++++ 4 files changed, 443 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt create mode 100644 drivers/phy/st/phy-stm32-usbphyc.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
