On Wed, Feb 28, 2018 at 05:40:22PM +0000, Fabrizio Castro wrote: > On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non > boot CPUs run a routine designed to bring up SMP and deal with hot plug. > The value contained in the SBAR registers is not initialized by a WDT > triggered reset, which means that after a WDT triggered reset we jump > to the SMP bring up routine, preventing the system from executing the > bootrom code. > > The purpose of this patch is to jump to the bootrom code in case of a > WDT triggered reset, and keep the SMP functionality untouched. > In order to tell if the code had been called due to the WDT overflowing > we are testing WOVF from register RWTCSRA. > > The new function shmobile_boot_vector_gen2 isn't replacing > shmobile_boot_vector for backward compatibility reasons. The kernel > will install the best option (either shmobile_boot_vector or > shmobile_boot_vector_gen2) to ICRAM1 after parsing the device tree, > according to the amount of memory available. > > Since shmobile_boot_vector has become bigger, "reg" property of nodes > compatible with "renesas,smp-sram" now need to be set to a value > greater or equal to "<0 0x60>". > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@xxxxxxxxxxxxxx> Thanks, I have marked this as deferred as I would like dependencies to be merged first. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
