The Broadcom BCM54xx register definitions are shared between BCM54xx and BCM7xx internal PHYs for which we are adding support. Extract these register definitions and put them in include/linux/brcmphy.h for use by the BCM7xxx internal PHY driver. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- v4, v3: - new patch drivers/net/phy/broadcom.c | 52 ---------------------------------------------- include/linux/brcmphy.h | 51 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+), 52 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f8c90ea..34088d6 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -25,58 +25,6 @@ #define BRCM_PHY_REV(phydev) \ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask)) - -#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ -#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ -#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ - -#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ -#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ - -#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ -#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ -#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ -#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ - -#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ -#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ -#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ -#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ -#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ -#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ -#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ -#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ -#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ -#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ -#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ -#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ -#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ -#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ -#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ -#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ -#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ -#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ - -#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ -#define MII_BCM54XX_SHD_WRITE 0x8000 -#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) -#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) - -/* - * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) - */ -#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 -#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 -#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 - -#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 -#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 -#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 - -#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 - - /* * Broadcom LED source encodings. These are used in BCM5461, BCM5481, * BCM5482, and possibly some others. diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 677b4f0..104e3ef 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -33,4 +33,55 @@ #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 +/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */ +#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ +#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ +#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ + +#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ +#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ + +#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ +#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ + +#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ +#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ +#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ +#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ +#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ +#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ +#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ +#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ +#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ +#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ +#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ +#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ +#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ +#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ +#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ +#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ +#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ +#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ + +#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ +#define MII_BCM54XX_SHD_WRITE 0x8000 +#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) +#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) + +/* + * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) + */ +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 +#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 + +#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 +#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 + +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 + #endif /* _LINUX_BRCMPHY_H */ -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
