This patch adds support for configuring the port multiplexer hardware which resides in front of the GENET Ethernet MAC controller. This allows us to support: - internal PHYs (using drivers/net/phy/bcm7xxx.c) - MoCA PHYs which are an entirely separate hardware block not covered here - external PHYs and switches Note that MoCA and switches are currently supported using the emulated "fixed PHY" driver. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- Changes since v2: - remove the need to parse the 'max-speed' or 'fixed-link' properties to know the PHY configured speed - re-order MDIO bus probing to perform port multiplexer configuration after probing the PHYs, simplifying logic - check that the MDIO bus node compatible string matches our major version as pointed out by Mark Changes since v1: - fixed MDIO crash/warning when Device Tree probing fails - removed the use of priv->phy_type and use priv->phy_interface directly drivers/net/ethernet/broadcom/genet/bcmmii.c | 470 +++++++++++++++++++++++++++ 1 file changed, 470 insertions(+) create mode 100644 drivers/net/ethernet/broadcom/genet/bcmmii.c diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c new file mode 100644 index 0000000..3b1e04e --- /dev/null +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -0,0 +1,470 @@ +/* + * Broadcom GENET MDIO routines + * + * Copyright (c) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/bitops.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/brcmphy.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> + +#include "bcmgenet.h" + +/* read a value from the MII */ +static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location) +{ + int ret; + struct net_device *dev = bus->priv; + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | + (location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD); + /* Start MDIO transaction*/ + reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + reg |= MDIO_START_BUSY; + bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); + wait_event_timeout(priv->wq, + !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) + & MDIO_START_BUSY), + HZ / 100); + ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + + if (ret & MDIO_READ_FAIL) + return -EIO; + + return ret & 0xffff; +} + +/* write a value to the MII */ +static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id, + int location, u16 val) +{ + struct net_device *dev = bus->priv; + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | + (location << MDIO_REG_SHIFT) | (0xffff & val)), + UMAC_MDIO_CMD); + reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); + reg |= MDIO_START_BUSY; + bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); + wait_event_timeout(priv->wq, + !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) & + MDIO_START_BUSY), + HZ / 100); + + return 0; +} + +/* setup netdev link state when PHY link status change and + * update UMAC and RGMII block when link up + */ +static void bcmgenet_mii_setup(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + u32 reg, cmd_bits = 0; + unsigned int status_changed = 0; + + if (priv->old_link != phydev->link) { + status_changed = 1; + priv->old_link = phydev->link; + } + + if (phydev->link) { + /* program UMAC and RGMII block based on established link + * speed, pause, and duplex. + * the speed set in umac->cmd tell RGMII block which clock + * 25MHz(100Mbps)/125MHz(1Gbps) to use for transmit. + * receive clock is provided by PHY. + */ + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg &= ~OOB_DISABLE; + reg |= RGMII_LINK; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + + /* speed */ + if (phydev->speed == SPEED_1000) + cmd_bits = UMAC_SPEED_1000; + else if (phydev->speed == SPEED_100) + cmd_bits = UMAC_SPEED_100; + else + cmd_bits = UMAC_SPEED_10; + cmd_bits <<= CMD_SPEED_SHIFT; + + if (priv->old_duplex != phydev->duplex) { + status_changed = 1; + priv->old_duplex = phydev->duplex; + } + + /* duplex */ + if (phydev->duplex != DUPLEX_FULL) + cmd_bits |= CMD_HD_EN; + + if (priv->old_pause != phydev->pause) { + status_changed = 1; + priv->old_pause = phydev->pause; + } + + /* pause capability */ + if (!phydev->pause) + cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE; + + reg = bcmgenet_umac_readl(priv, UMAC_CMD); + reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) | + CMD_HD_EN | + CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE); + reg |= cmd_bits; + bcmgenet_umac_writel(priv, reg, UMAC_CMD); + } + + if (status_changed) + phy_print_status(phydev); +} + +void bcmgenet_mii_reset(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + + if (priv->phydev) { + phy_init_hw(priv->phydev); + phy_start_aneg(priv->phydev); + } +} + +static void bcmgenet_ephy_power_up(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg = 0; + + /* EXT_GPHY_CTRL is only valid for GENETv4 and onward */ + if (!GENET_IS_V4(priv)) + return; + + reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL); + reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN); + reg |= EXT_GPHY_RESET; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(2); + + reg &= ~EXT_GPHY_RESET; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + udelay(20); +} + +static void bcmgenet_internal_phy_setup(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg; + + /* Power up EPHY */ + bcmgenet_ephy_power_up(dev); + /* enable APD */ + reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); + reg |= EXT_PWR_DN_EN_LD; + bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); + bcmgenet_mii_reset(dev); +} + +static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) +{ + u32 reg; + + /* Speed settings are set in bcmgenet_mii_setup() */ + reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL); + reg |= LED_ACT_SOURCE_MAC; + bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL); +} + +int bcmgenet_mii_config(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + struct device *kdev = &priv->pdev->dev; + const char *phy_name = NULL; + u32 id_mode_dis = 0; + u32 port_ctrl; + u32 reg; + + priv->ext_phy = !phy_is_internal(priv->phydev) && + (priv->phy_interface != PHY_INTERFACE_MODE_MOCA); + + if (phy_is_internal(priv->phydev)) + priv->phy_interface = PHY_INTERFACE_MODE_NA; + + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_MOCA: + /* Irrespective of the actually configured PHY speed (100 or + * 1000) GENETv4 only has an internal GPHY so we will just end + * up masking the Gigabit features from what we support, not + * switching to the EPHY + */ + if (GENET_IS_V4(priv)) + port_ctrl = PORT_MODE_INT_GPHY; + else + port_ctrl = PORT_MODE_INT_EPHY; + + bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); + + if (phy_is_internal(priv->phydev)) { + phy_name = "internal PHY"; + bcmgenet_internal_phy_setup(dev); + } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { + phy_name = "MoCA"; + bcmgenet_moca_phy_setup(priv); + } + break; + + case PHY_INTERFACE_MODE_MII: + phy_name = "external MII"; + phydev->supported &= PHY_BASIC_FEATURES; + bcmgenet_sys_writel(priv, + PORT_MODE_EXT_EPHY, SYS_PORT_CTRL); + break; + + case PHY_INTERFACE_MODE_REVMII: + phy_name = "external RvMII"; + /* of_mdiobus_register took care of reading the 'max-speed' + * PHY property for us, effectively limiting the PHY supported + * capabilities, use that knowledge to also configure the + * Reverse MII interface correctly. + */ + if ((priv->phydev->supported & PHY_BASIC_FEATURES) == + PHY_BASIC_FEATURES) + port_ctrl = PORT_MODE_EXT_RVMII_25; + else + port_ctrl = PORT_MODE_EXT_RVMII_50; + bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); + break; + + case PHY_INTERFACE_MODE_RGMII: + /* RGMII_NO_ID: TXC transitions at the same time as TXD + * (requires PCB or receiver-side delay) + * RGMII: Add 2ns delay on TXC (90 degree shift) + * + * ID is implicitly disabled for 100Mbps (RG)MII operation. + */ + id_mode_dis = BIT(16); + /* fall through */ + case PHY_INTERFACE_MODE_RGMII_TXID: + if (id_mode_dis) + phy_name = "external RGMII (no delay)"; + else + phy_name = "external RGMII (TX delay)"; + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg |= RGMII_MODE_EN | id_mode_dis; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + bcmgenet_sys_writel(priv, + PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); + break; + default: + dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface); + return -EINVAL; + } + + dev_info(kdev, "configuring instance for %s\n", phy_name); + + return 0; +} + +static int bcmgenet_mii_probe(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev; + unsigned int phy_flags; + int ret; + + if (priv->phydev) { + pr_info("PHY already attached\n"); + return 0; + } + + if (priv->phy_dn) + phydev = of_phy_connect(dev, priv->phy_dn, + bcmgenet_mii_setup, 0, + priv->phy_interface); + else + phydev = of_phy_connect_fixed_link(dev, + bcmgenet_mii_setup, + priv->phy_interface); + + if (!phydev) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + + priv->old_link = -1; + priv->old_duplex = -1; + priv->old_pause = -1; + priv->phydev = phydev; + + /* Configure port multiplexer based on what the probed PHY device since + * reading the 'max-speed' property determines the maximum supported + * PHY speed which is needed for bcmgenet_mii_config() to configure + * things appropriately. + */ + ret = bcmgenet_mii_config(dev); + if (ret) { + phy_disconnect(priv->phydev); + return ret; + } + + phy_flags = PHY_BRCM_100MBPS_WAR; + + /* workarounds are only needed for 100Mpbs PHYs, and + * never on GENET V1 hardware + */ + if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv)) + phy_flags = 0; + + phydev->dev_flags |= phy_flags; + phydev->advertising = phydev->supported; + + /* The internal PHY has its link interrupts routed to the + * Ethernet MAC ISRs + */ + if (phy_is_internal(priv->phydev)) + priv->mii_bus->irq[phydev->addr] = PHY_IGNORE_INTERRUPT; + else + priv->mii_bus->irq[phydev->addr] = PHY_POLL; + + pr_info("attached PHY at address %d [%s]\n", + phydev->addr, phydev->drv->name); + + return 0; +} + +static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv) +{ + struct mii_bus *bus; + + if (priv->mii_bus) + return 0; + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + pr_err("failed to allocate\n"); + return -ENOMEM; + } + + bus = priv->mii_bus; + bus->priv = priv->dev; + bus->name = "bcmgenet MII bus"; + bus->parent = &priv->pdev->dev; + bus->read = bcmgenet_mii_read; + bus->write = bcmgenet_mii_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", + priv->pdev->name, priv->pdev->id); + + bus->irq = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!bus->irq) { + mdiobus_free(priv->mii_bus); + return -ENOMEM; + } + + return 0; +} + +static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) +{ + struct device_node *dn = priv->pdev->dev.of_node; + struct device *kdev = &priv->pdev->dev; + struct device_node *mdio_dn; + char *compat; + int ret; + + mdio_dn = of_get_next_child(dn, NULL); + if (!mdio_dn) { + dev_err(kdev, "unable to find MDIO bus node\n"); + return -ENODEV; + } + + compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version); + if (!compat) + return -ENOMEM; + + ret = of_device_is_compatible(mdio_dn, compat); + kfree(compat); + if (ret == 0) { + dev_err(kdev, "invalid MDIO bus node\n"); + return -EINVAL; + } + + ret = of_mdiobus_register(priv->mii_bus, mdio_dn); + if (ret) { + dev_err(kdev, "failed to register MDIO bus\n"); + return ret; + } + + /* Fetch the PHY phandle */ + priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0); + + /* Get the link mode */ + priv->phy_interface = of_get_phy_mode(dn); + + return 0; +} + +int bcmgenet_mii_init(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + int ret; + + ret = bcmgenet_mii_alloc(priv); + if (ret) + return ret; + + ret = bcmgenet_mii_of_init(priv); + if (ret) + goto out_free; + + ret = bcmgenet_mii_probe(dev); + if (ret) + goto out; + + return 0; + +out: + mdiobus_unregister(priv->mii_bus); +out_free: + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); + return ret; +} + +void bcmgenet_mii_exit(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + + mdiobus_unregister(priv->mii_bus); + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); +} -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html