Re: [PATCH v4 4/6] arm64: dts: exynos: add OF graph between MHL and USB connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.02.2018 22:24, Rob Herring wrote:
> On Wed, Feb 21, 2018 at 2:55 AM, Andrzej Hajda <a.hajda@xxxxxxxxxxx> wrote:
>> OF graph describes MHL data lanes between MHL and respective USB
>> connector.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
>> v4:
>> - added missing reg property in connector's port node (Krzysztof)
>> ---
>>  .../boot/dts/exynos/exynos5433-tm2-common.dtsi     | 32 ++++++++++++++++++++--
>>  1 file changed, 29 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> index f604f6b1a9c2..2ed506df94d0 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -817,9 +817,22 @@
>>                 clocks = <&pmu_system_controller 0>;
>>                 clock-names = "xtal";
>>
>> -               port {
>> -                       mhl_to_hdmi: endpoint {
>> -                               remote-endpoint = <&hdmi_to_mhl>;
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       port@0 {
>> +                               reg = <0>;
>> +                               mhl_to_hdmi: endpoint {
>> +                                       remote-endpoint = <&hdmi_to_mhl>;
>> +                               };
>> +                       };
>> +
>> +                       port@1 {
>> +                               reg = <1>;
>> +                               mhl_to_musb_con: endpoint {
>> +                                       remote-endpoint = <&musb_con_to_mhl>;
>> +                               };
> These ports are mutually exclusive, right? If so, it should be 1 port
> with 2 endpoints. Ports should represent independent data flows.
> Something muxed or replicated (1 to many connection) should be be
> endpoints.

No, this is HDMI -> MHL bridge, so port 0 is HDMI input, and port 1 is
MHL output.

Regards
Andrzej

>
> Rob
>
>
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux