Re: [PATCH net-next v2 01/10] net: phy: add "internal" PHY mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Date: Wed, 12 Feb 2014 21:29:46 -0800

> On some systems, the PHY can be internal, in the same package as the
> Ethernet MAC, and still be responding to a specific address on the MDIO
> bus, in that case, the Ethernet MAC might need to know about it to
> properly configure a port multiplexer to switch to an internal or
> external PHY. Add a new PHY interface mode for this and update the
> Device Tree of_get_phy_mode() function to look for it.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
> Changes since v1:
> - rebased against lastest net-next master branch

This is over-engineering.

The only thing that even uses this value is phy_is_internal(), and
the only user of phy_is_internal() is the generic PHY layer ethtool
operation for get-settings.

The PHY layer already has a place to indicate whether a PHY is
internal or not, overriding that using the PHY mode is trouble
waiting to happen.

Please, just provide some way to propagate this device tree property
into phy->is_internal.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux