[PATCH 3/3] ARM: mach-stm32: Add Extended TrustZone Protection driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Before binding a driver Extended TrustZone Protection (ETZPC) driver
checks that the hardware block is accessible to non-secure world.
Hardware blocks split between secure and non-secure is done at early
boot stage so the driver only needs to read the status (2 bits) for each
of the block.

Hardware blocks status bits location in the registers is computed
from device address index in the array.

To avoid to bind a device which will not be accessible ETZPC driver
must be probed early, at least before platform driver, so just after
core initialisation.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
 arch/arm/mach-stm32/Kconfig       |   7 ++
 arch/arm/mach-stm32/Makefile      |   1 +
 arch/arm/mach-stm32/stm32-etzpc.c | 252 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 260 insertions(+)
 create mode 100644 arch/arm/mach-stm32/stm32-etzpc.c

diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 5bc7f5ab61cd..a3ef308642be 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -44,6 +44,13 @@ config MACH_STM32MP157
 	bool "STMicroelectronics STM32MP157"
 	default y
 
+config STM32_ETZPC
+	bool "STM32 Extended TrustZone Protection"
+	depends on MACH_STM32MP157
+	help
+	  Select y to enable STM32 Extended TrustZone Protection
+	  Controller (ETZPC)
+
 endif # ARMv7-A
 
 endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index bd0b7b5d6e9d..2e1e729a68c9 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -1 +1,2 @@
 obj-y += board-dt.o
+obj-$(CONFIG_STM32_ETZPC) += stm32-etzpc.o
diff --git a/arch/arm/mach-stm32/stm32-etzpc.c b/arch/arm/mach-stm32/stm32-etzpc.c
new file mode 100644
index 000000000000..b338d219d5a8
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32-etzpc.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx> for STMicroelectronics.
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define ETZPC_DECPROT0		0x10
+#define ETZPC_IP_VER		0x3F4
+
+#define IP_VER_MP1		0x00000020
+
+#define DECPROT_MASK		0x03
+#define NB_PROT_PER_REG		0x10
+#define DECPROT_NB_BITS		2
+
+struct stm32_etzpc_cfg {
+	const u32 *addr;
+	const int size;
+	const int version;
+};
+
+struct stm32_etzpc {
+	void __iomem *base;
+	const struct stm32_etzpc_cfg *cfg;
+	struct notifier_block nb;
+};
+
+static inline struct stm32_etzpc *to_stm32_etzpc(struct notifier_block *nb)
+{
+	return container_of(nb, struct stm32_etzpc, nb);
+}
+
+static const u32 stm32mp1_ip_addr[] = {
+	0x5c008000,	/* 00 stgenc */
+	0x54000000,	/* 01 bkpsram */
+	0x5c003000,	/* 02 iwdg1 */
+	0x5c000000,	/* 03 usart1 */
+	0x5c001000,	/* 04 spi6 */
+	0x5c002000,	/* 05 i2c4 */
+	0xffffffff,	/* 06 reserved */
+	0x54003000,	/* 07 rng1 */
+	0x54002000,	/* 08 hash1 */
+	0x54001000,	/* 09 cryp1 */
+	0x5a003000,	/* 0A ddrctrl */
+	0x5a004000,	/* 0B ddrphyc */
+	0x5c009000,	/* 0C i2c6 */
+	0xffffffff,	/* 0D reserved */
+	0xffffffff,	/* 0E reserved */
+	0xffffffff,	/* 0F reserved */
+	0x40000000,	/* 10 tim2 */
+	0x40001000,	/* 11 tim3 */
+	0x40002000,	/* 12 tim4 */
+	0x40003000,	/* 13 tim5 */
+	0x40004000,	/* 14 tim6 */
+	0x40005000,	/* 15 tim7 */
+	0x40006000,	/* 16 tim12 */
+	0x40007000,	/* 17 tim13 */
+	0x40008000,	/* 18 tim14 */
+	0x40009000,	/* 19 lptim1 */
+	0x4000a000,	/* 1A wwdg1 */
+	0x4000b000,	/* 1B spi2 */
+	0x4000c000,	/* 1C spi3 */
+	0x4000d000,	/* 1D spdifrx */
+	0x4000e000,	/* 1E usart2 */
+	0x4000f000,	/* 1F usart3 */
+	0x40010000,	/* 20 uart4 */
+	0x40011000,	/* 21 uart5 */
+	0x40012000,	/* 22 i2c1 */
+	0x40013000,	/* 23 i2c2 */
+	0x40014000,	/* 24 i2c3 */
+	0x40015000,	/* 25 i2c5 */
+	0x40016000,	/* 26 cec */
+	0x40017000,	/* 27 dac */
+	0x40018000,	/* 28 uart7 */
+	0x40019000,	/* 29 uart8 */
+	0xffffffff,	/* 2A reserved */
+	0xffffffff,	/* 2B reserved */
+	0x4001c000,	/* 2C mdios */
+	0xffffffff,	/* 2D reserved */
+	0xffffffff,	/* 2E reserved */
+	0xffffffff,	/* 2F reserved */
+	0x44000000,	/* 30 tim1 */
+	0x44001000,	/* 31 tim8 */
+	0xffffffff,	/* 32 reserved */
+	0x44003000,	/* 33 usart6 */
+	0x44004000,	/* 34 spi1 */
+	0x44005000,	/* 35 spi4 */
+	0x44006000,	/* 36 tim15 */
+	0x44007000,	/* 37 tim16 */
+	0x44008000,	/* 38 tim17 */
+	0x44009000,	/* 39 spi5 */
+	0x4400a000,	/* 3A sai1 */
+	0x4400b000,	/* 3B sai2 */
+	0x4400c000,	/* 3C sai3 */
+	0x4400d000,	/* 3D dfsdm */
+	0x4400e000,	/* 3E tt_fdcan */
+	0xffffffff,	/* 3F reserved */
+	0x50021000,	/* 40 lptim2 */
+	0x50022000,	/* 41 lptim3 */
+	0x50023000,	/* 42 lptim4 */
+	0x50024000,	/* 43 lptim5 */
+	0x50027000,	/* 44 sai4 */
+	0x50025000,	/* 45 vrefbuf */
+	0x4c006000,	/* 46 dcmi */
+	0x4c004000,	/* 47 crc2 */
+	0x48003000,	/* 48 adc */
+	0x4c002000,	/* 49 hash2 */
+	0x4c003000,	/* 4A rng2 */
+	0x4c005000,	/* 4B cryp2 */
+	0xffffffff,	/* 4C reserved */
+	0xffffffff,	/* 4D reserved */
+	0xffffffff,	/* 4E reserved */
+	0xffffffff,	/* 4F reserved */
+	0xffffffff,	/* 50 sram1 */
+	0xffffffff,	/* 51 sram2 */
+	0xffffffff,	/* 52 sram3 */
+	0xffffffff,	/* 53 sram4 */
+	0xffffffff,	/* 54 retram */
+	0x49000000,	/* 55 otg */
+	0x48004000,	/* 56 sdmmc3 */
+	0x48005000,	/* 57 dlybsd3 */
+	0x48000000,	/* 58 dma1 */
+	0x48001000,	/* 59 dma2 */
+	0x48002000,	/* 5A dmamux */
+	0x58002000,	/* 5B fmc */
+	0x58003000,	/* 5C qspi */
+	0x58004000,	/* 5D dlybq */
+	0x5800a000,	/* 5E eth */
+	0xffffffff,	/* 5F reserved */
+};
+
+static const struct stm32_etzpc_cfg stm32_etzpc_mp1_cfg = {
+	.addr = stm32mp1_ip_addr,
+	.size = ARRAY_SIZE(stm32mp1_ip_addr),
+	.version = IP_VER_MP1
+};
+
+static const struct of_device_id stm32_etzpc_of_match[] = {
+	{
+		.compatible = "st,stm32mp1-etzpc",
+		.data = (void *)&stm32_etzpc_mp1_cfg,
+	},
+	{ /* end node */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_etzpc_of_match);
+
+static int stm32_etzpc_notifier_call(struct notifier_block *nb,
+				     unsigned long event, void *data)
+{
+	struct stm32_etzpc *etzpc = to_stm32_etzpc(nb);
+	struct device *dev = data;
+	struct resource res;
+	int i;
+
+	if (event != BUS_NOTIFY_BIND_DRIVER)
+		return NOTIFY_DONE;
+
+	if (of_address_to_resource(dev->of_node, 0, &res))
+		return NOTIFY_DONE;
+
+	for (i = 0; i < etzpc->cfg->size; i++) {
+		if (etzpc->cfg->addr[i] == res.start) {
+			/*
+			 * Each hardware block protection status is defined by
+			 * a 2 bits field and all of them are packed into
+			 * 32 bits registers. Do some computation to get
+			 * register offset and the shift.
+			 */
+			u32 status;
+			int offset = (i / NB_PROT_PER_REG) * sizeof(u32);
+			int shift = (i % NB_PROT_PER_REG) * DECPROT_NB_BITS;
+
+			status = readl(etzpc->base + ETZPC_DECPROT0 + offset);
+			status &= DECPROT_MASK << shift;
+
+			return (status == DECPROT_MASK << shift) ?
+				NOTIFY_DONE : NOTIFY_BAD;
+		}
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int stm32_etzpc_probe(struct device_node *np,
+			     const struct of_device_id *match)
+{
+	struct stm32_etzpc *etzpc;
+	int version, ret;
+
+	etzpc = kzalloc(sizeof(*etzpc), GFP_KERNEL);
+	if (!etzpc)
+		return -ENOMEM;
+
+	etzpc->base = of_iomap(np, 0);
+	if (IS_ERR(etzpc->base)) {
+		ret = PTR_ERR(etzpc->base);
+		goto failed;
+	}
+
+	etzpc->cfg = (const struct stm32_etzpc_cfg *)match->data;
+
+	version = readl(etzpc->base + ETZPC_IP_VER);
+	if (version != etzpc->cfg->version) {
+		pr_err("Wrong ETZPC version\n");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	etzpc->nb.notifier_call = stm32_etzpc_notifier_call,
+	ret = bus_register_notifier(&platform_bus_type, &etzpc->nb);
+	if (!ret)
+		return 0;
+
+failed:
+	kfree(etzpc);
+	return ret;
+}
+
+/*
+ * stm32_etzpc_init needs to be called before starting to probe
+ * platform drivers to be able to catch all bind notifications
+ * that's why it is tagged as postcore_initcall
+ */
+static int __init stm32_etzpc_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *m;
+	int ret;
+
+	np = of_find_matching_node_and_match(NULL, stm32_etzpc_of_match, &m);
+
+	if (!np)
+		return -ENODEV;
+
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	ret = stm32_etzpc_probe(np, m);
+
+	of_node_put(np);
+
+	return ret;
+}
+postcore_initcall(stm32_etzpc_init);
-- 
2.15.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux