On Tue, 27 Feb 2018 09:20:39 +0100 Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote: > On Tue, 2018-02-27 at 10:07 +0800, Yong Deng wrote: > > Add binding documentation for Allwinner V3s CSI. > > > > Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > > Acked-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx> > > --- > > .../devicetree/bindings/media/sun6i-csi.txt | 59 ++++++++++++++++++++++ > > 1 file changed, 59 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt > > > > diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt > > new file mode 100644 > > index 000000000000..2ff47a9507a6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt > > @@ -0,0 +1,59 @@ > > +Allwinner V3s Camera Sensor Interface > > +------------------------------------- > > + > > +Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > > +interface and CSI1 is used for parallel interface. > > + > > +Required properties: > > + - compatible: value must be "allwinner,sun8i-v3s-csi" > > + - reg: base address and size of the memory-mapped region. > > + - interrupts: interrupt associated to this IP > > + - clocks: phandles to the clocks feeding the CSI > > + * bus: the CSI interface clock > > + * mod: the CSI module clock > > + * ram: the CSI DRAM clock > > + - clock-names: the clock names mentioned above > > + - resets: phandles to the reset line driving the CSI > > + > > +Each CSI node should contain one 'port' child node with one child 'endpoint' > > +node, according to the bindings defined in > > +Documentation/devicetree/bindings/media/video-interfaces.txt. As mentioned > > +above, the endpoint's bus type should be MIPI CSI-2 for CSI0 and parallel or > > +Bt656 for CSI1. > > + > > +Endpoint node properties for CSI1 > > +--------------------------------- > > + > > +- remote-endpoint : (required) a phandle to the bus receiver's endpoint > > + node > > +- bus-width: : (required) must be 8, 10, 12 or 16 > > +- pclk-sample : (optional) (default: sample on falling edge) > > It would be helpful to state that 1 is rising edge and 0 is falling > edge, see for example ov5640.txt I think this is already documented at Documentation/devicetree/bindings/media/video-interfaces.txt. > > regards > Philipp Thanks, Yong -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
