> From: Jean-Philippe Brucker [mailto:jean-philippe.brucker@xxxxxxx] > Sent: Thursday, February 15, 2018 8:42 PM > > On 13/02/18 23:43, Tian, Kevin wrote: > >> From: Jean-Philippe Brucker > >> Sent: Tuesday, February 13, 2018 8:40 PM > >> > >> > >> [...] > >>>> + > >>>> +/** > >>>> + * iommu_sva_device_init() - Initialize Shared Virtual Addressing for > a > >>>> device > >>>> + * @dev: the device > >>>> + * @features: bitmask of features that need to be initialized > >>>> + * @max_pasid: max PASID value supported by the device > >>>> + * > >>>> + * Users of the bind()/unbind() API must call this function to initialize > all > >>>> + * features required for SVA. > >>>> + * > >>>> + * - If the device should support multiple address spaces (e.g. PCI > >> PASID), > >>>> + * IOMMU_SVA_FEAT_PASID must be requested. > >>> > >>> I think it is by default assumed when using this API, based on definition > of > >>> SVA. Can you elaborate the situation where this flag can be cleared? > >> > >> When passing a device to userspace, you could also share its non-pasid > >> address space with the process. It requires a new domain type so is left > >> as a TODO in patch 2/37. I did get requests for this feature, though I > >> think it was mostly for prototyping. I guess I could remove the flag, and > >> reintroduce it as IOMMU_SVA_FEAT_NO_PASID later on. > > > > sorry I still didn't get the definition of non-pasid address space. > > Did you mean the GPA/IOVA address space and no_pasid implies > > actually some default PASID associated? > > Yes I mean merging the process address space and IOVA space. There are > no > PASIDs involved if the device or the IOMMU doesn't support it. Instead of > private DMA page tables you program the mm pgd into the IOMMU. A VFIO > userspace driver, instead of sending MAP/UNMAP ioctl, could simply issue > a > BIND. got it. yes it's better to remove it for now which can avoid unnecessary confusion. :-) > > Technically nothing prevents it, but now the resv problem discussed on > patch 2/37 stands out. For example on x86 you'd probably need to carve > the > IOAPIC MSI range out of the process address space. On Arm you'd need to > create a write-only mapping for MSIs (IOMMU translates it to the IRQ chip > address, but thankfully accessing the doorbell from CPU side doesn't > trigger an MSI.) so if overlap already exists when binding a process address space (since binding may happen much later than creating the process), I assume the call will simply fail since carve out at this point is not possible? > > >> [...] > >>>> + ret = domain->ops->sva_device_init(dev, features, &min_pasid, > >>>> + &max_pasid); > >>>> + if (ret) > >>>> + return ret; > >>>> + > >>>> + /* FIXME: racy. Next version should have a mutex (same as fault > >>>> handler) */ > >>>> + dev_param->sva_features = features; > >>>> + dev_param->min_pasid = min_pasid; > >>>> + dev_param->max_pasid = max_pasid; > >>> > >>> what's the point of min_pasid here? > >> > >> Arm SMMUv3 uses entry 0 of the PASID table for the default (non-pasid) > >> context, so it needs to set min_pasid to 1. AMD IOMMU recently added > a > >> similar feature (GIoSup), if I understood correctly. > >> > > > > just for such purpose maybe we should just define a reserved_pasid > > otherwise there will be some waste if an implementation allows it > > non-zero. > > What's wasted? It's slightly simpler to use min_pasid because we just pass > that limit to idr_alloc(). With a reserved_pasid we'll have to call > idr_alloc(reserved_pasid) once, for the same result. > I'm thinking about the case where an implementation allows software to define a random reserved_pasid, then banning all pasids below reserved one could be a waste. But after more thinking it is not a big problem. We can request such driver to use 0 as reserved_pasid then same situation as ARM side. Thanks Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
