The Raspberry Pi Zero W has an onboard BT chip (BCM43438). So enable the necessary HCI UART driver (requires serial device bus). Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- arch/arm/configs/bcm2835_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 43dab48..8682b15 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -49,6 +49,9 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y +CONFIG_BT=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_DEVTMPFS=y @@ -74,6 +77,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_TTY_PRINTK=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
