Hi, On Fri, Jan 12, 2018 at 5:05 PM, Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx> wrote: > This driver supports GENI based UART Controller in the Qualcomm SOCs. The > Qualcomm Generic Interface (GENI) is a programmable module supporting a > wide range of serial interfaces including UART. This driver support console > operations using FIFO mode of transfer. > > Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx> > Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx> > Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx> > --- > drivers/tty/serial/Kconfig | 10 + > drivers/tty/serial/Makefile | 1 + > drivers/tty/serial/qcom_geni_serial.c | 1414 +++++++++++++++++++++++++++++++++ > 3 files changed, 1425 insertions(+) > create mode 100644 drivers/tty/serial/qcom_geni_serial.c > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index b788fee..1be30e5 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -1098,6 +1098,16 @@ config SERIAL_MSM_CONSOLE > select SERIAL_CORE_CONSOLE > select SERIAL_EARLYCON > > +config SERIAL_QCOM_GENI > + tristate "QCOM on-chip GENI based serial port support" Should this be bool instead of tristate? Guenter noticed that we'll get link errors if we try building this as a module. Specifically, he noted that the "qcom_geni_serial.c" file refers to "uart_console_device" and "uart_console_device" is not exported (and shouldn't be since a console has to be available before modules are loaded). -Doug -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
