Re: [PATCH 2/2] i2c: add support for Socionext SynQuacer I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20 February 2018 at 19:39, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Tue, Feb 20, 2018 at 8:04 PM, Ard Biesheuvel
> <ard.biesheuvel@xxxxxxxxxx> wrote:
>> On 20 February 2018 at 14:02, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
>>> On Tue, Feb 20, 2018 at 11:08 AM, Ard Biesheuvel
>>> <ard.biesheuvel@xxxxxxxxxx> wrote:
>
>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>
>>> Shouldn't be // ?
>
>> IIUC, this applies to .h files only, and /* */ is preferred for .c files.
>
> Other way around.
>
> Documentation/process/license-rules.rst
>

OK got it

>>>> +#define WAIT_PCLK(n, rate)     ndelay((((1000000000 +  (rate) - 1) / \
>>>> +                                        (rate) + n - 1) / n) + 10)
>>>
>>> This split makes it harder to catch the calculus.
>>> Also, you can use DIV_ROUND_UP(), though it longer, but adds a bit of
>>> clarity to the calculus.
>
>> Yeah. This was present in the original code, and I tried to avoid
>> touching it :-)
>
> Yeah, but below there are several instances with DIV_ROUND_UP().
>

I'll replace it with the equivalent

#define WAIT_PCLK(n, rate) \
    ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10)

>>>> +static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret)
>>>> +{
>>>> +       dev_dbg(i2c->dev, "STOP\n");
>>>
>>> Hmm... Can't use FTRACE ?
>
>> What do you mean?
>
> The message kinda useless, esp. if you can enable functional tracing.
> I saw a lot of debugging messages in the code, perhaps it makes sense
> at some point to make some trace points in I2C core and leave only HW
> related here.
>

OK, I will just drop it.

>>>> +       if (dev_of_node(&pdev->dev)) {
>>>> +               i2c->clk = devm_clk_get(&pdev->dev, "pclk");
>>>> +               if (IS_ERR(i2c->clk)) {
>>>> +                       dev_err(&pdev->dev, "cannot get clock\n");
>>>> +                       return PTR_ERR(i2c->clk);
>>>> +               }
>>>> +               dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
>>>> +
>>>> +               i2c->clkrate = clk_get_rate(i2c->clk);
>>>> +               dev_dbg(&pdev->dev, "clock rate %d\n", i2c->clkrate);
>>>> +               clk_prepare_enable(i2c->clk);
>>>> +       } else {
>>>
>>>> +               ret = device_property_read_u32(&pdev->dev,
>>>> +                                              "socionext,pclk-rate",
>>>> +                                              &i2c->clkrate);
>>>
>>> I suppose for ACPI we just register a fixed rate clock and use it in
>>> the driver in the same way as in OF case.
>>> I guess at some point we even can provide a generic clock provider for
>>> ACPI based on rate property.
>
>> Is there a question here? Do you want me to change anything?
>
> Is it opener for discussion. At least in the drivers we have done for
> x86 we do the way I described.
>
> See, for example, drivers/mfd/intel-lpss.c
>

OK, I see what you mean now. But for this driver, creating a fixed
rate clock with no controls whatsoever, only to interrogate it for its
rate (which we retrieved from the ACPI device node in the first place)
seems rather pointless to me. Am I missing something here?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux