Hi Philippe,
On Tue, Feb 20, 2018 at 08:53:22AM +0100, Philippe Ombredanne wrote:
> Dear Manivannan,
>
> On Sat, Feb 17, 2018 at 9:44 PM, Manivannan Sadhasivam
> <manivannan.sadhasivam@xxxxxxxxxx> wrote:
> > Add pinctrl driver for Actions Semi S900 SoC. The driver supports
> > pinctrl, pinmux and pinconf functionalities through a range of registers
> > common to both gpio driver and pinctrl driver.
> >
> > Pinmux functionality is available only for the pin groups while the
> > pinconf functionality is available for both pin groups and individual
> > pins.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>
>
> <snip>
>
>
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/pinctrl-s900.c
> > @@ -0,0 +1,2536 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> <snip>
>
> > +MODULE_LICENSE("GPL v2");
>
> This does not match your license above. Per module.h "GPL v2" means
> GPL-2.0 where you license above GPL-2.0+ means or later
>
Should be MODULE_LICENSE("GPL"). Will get it fixed in next revision.
Thanks,
Mani
> --
> Cordially
> Philippe Ombredanne
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
