On Tue, Feb 20, 2018 at 06:00:48PM +0100, Niklas Cassel wrote:
> The PCIe controller in the artpec6 SoC supports both root complex and
> endpoint mode, however, the controller can only be used in one of the
> modes.
>
> Both pci nodes are disabled by default. A DTS file can enable one of
> them, depending on what mode it wants to run.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
> ---
> arch/arm/boot/dts/artpec6.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> index 1c46df0c03ce..8d02d210574a 100644
> --- a/arch/arm/boot/dts/artpec6.dtsi
> +++ b/arch/arm/boot/dts/artpec6.dtsi
> @@ -154,6 +154,10 @@
> interrupt-affinity = <&cpu0>, <&cpu1>;
> };
>
> + /*
> + * Both pci nodes cannot be enabled at the same time,
> + * leave the unwanted node as disabled.
> + */
> pcie: pcie@f8050000 {
> compatible = "axis,artpec6-pcie", "snps,dw-pcie";
> reg = <0xf8050000 0x2000
> @@ -181,6 +185,22 @@
> status = "disabled";
> };
>
> + pcie_ep: pcie_ep@f8050000 {
> + compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
> + reg = <0xf8050000 0x2000
> + 0xf8051000 0x2000
> + 0xf8040000 0x1000
> + 0xc0000000 0x20000000>;
> + reg-names = "dbi", "dbi2", "phy", "addr_space";
> + num-ib-windows = <6>;
> + num-ob-windows = <2>;
> + num-lanes = <2>;
> + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
Actually, interrupts and interrupt-names are not needed in EP mode,
so these two properties should be removed.
Will send out a V2 to fix this, but in the meantime, feel free to
review the rest of the patch series.
> + axis,syscon-pcie = <&syscon>;
> + status = "disabled";
> + };
> +
> pinctrl: pinctrl@f801d000 {
> compatible = "axis,artpec6-pinctrl";
> reg = <0xf801d000 0x400>;
> --
> 2.14.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
