Hi Simon, Geert
Cc Mark
> could you test this series as Geert does not have access to a bockw board?
>
> On Tue, Feb 11, 2014 at 09:56:47AM +0100, Geert Uytterhoeven wrote:
> > From: Geert Uytterhoeven <geert+renesas@xxxxxxxxxxxxxx>
> >
> > Binding documentation:
> > - Add future-proof "renesas,hspi-<soctype>" compatible values,
> > - Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
> > - Add reference to pinctrl documentation,
> > - Add example bindings.
> >
> > r8a7778 and r8a7779 dtsi:
> > - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
> > values,
> > - Correct reference to parent interrupt controller
> > (use "interrupt-parent" instead of "interrupt-controller"),
> > - Add missing "#address-cells" and "#size-cells" properties, which are
> > needed when populating the SPI buses.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxxxxxxx>
> > Cc: Mark Brown <broonie@xxxxxxxxxx>
> > ---
I tested this patch, and it works well.
But there are some notes
1) m25p80 driver DT support seems strange ??
${LINUX}/Documentation/devicetree/bindings/mtd/m25p80.txt
has explain about DT of m25p80 driver, but,
${LINUX}/drivers/mtd/devices/m25p80.c
doesn't have driver :: of_match_table.
but, it is using of_property_read_bool() on probe.
Is it out-of-tree support ?? I'm not sure,
anyway, m25p80 driver didn't probe.
So, I quick-hacked this issue in my local environment.
2) it needs Geert's this patch
Subject: [PATCH] mtd: m25p80: add support for the Spansion s25fl008k chip
Date: Tue, 11 Feb 2014 09:51:18 +0100
Kernel will hung-up without this patch
For HSPI / BockW point of view
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
