On 02/15/2018 05:03 PM, Amelie Delaunay wrote:
> This patch adds support for USB OTG HS on STM32H743 SoC.
> USB OTG HS controller is the same than the one used on STM32F7 SoCs.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
> ---
> arch/arm/boot/dts/stm32h743.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
> index 38d7cb8..65d4509 100644
> --- a/arch/arm/boot/dts/stm32h743.dtsi
> +++ b/arch/arm/boot/dts/stm32h743.dtsi
> @@ -217,6 +217,18 @@
> };
> };
>
> + usbotg_hs: usb@40040000 {
> + compatible = "st,stm32f7xx-hsotg";
Need to change the compatible and use the updated one [1]. I send a v2.
[1] https://patchwork.kernel.org/patch/10222153/
> + reg = <0x40040000 0x40000>;
> + interrupts = <77>;
> + clocks = <&rcc USB1OTG_CK>;
> + clock-names = "otg";
> + g-rx-fifo-size = <256>;
> + g-np-tx-fifo-size = <32>;
> + g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> +
> mdma1: dma@52000000 {
> compatible = "st,stm32h7-mdma";
> reg = <0x52000000 0x1000>;
> ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
