Re: [PATCH] dt-bindings: memory: ti-emif: add edac support under emif

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 13, 2018 at 07:15:29PM +0200, Tero Kristo wrote:
> Certain revisions of the TI EMIF IP contain ECC support in them. Reflect
> this in the DT binding. Also, add interrupts property as a required
> property for the emif controller, as all revisions of the emif IP contain
> interrupt support; this might remain unused by the kernel driver though.
> 
> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> ---
>  .../devicetree/bindings/memory-controllers/ti/emif.txt      | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
> index 621b41c..87022a9 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
> @@ -3,7 +3,9 @@
>  EMIF - External Memory Interface - is an SDRAM controller used in
>  TI SoCs. EMIF supports, based on the IP revision, one or more of
>  DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
> -of the EMIF IP and memory parts attached to it.
> +of the EMIF IP and memory parts attached to it. Certain revisions
> +of the EMIF controller also contain optional ECC support, which
> +corrects one bit errors and detects two bit errors.
>  
>  Required properties:
>  - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
> @@ -11,6 +13,8 @@ Required properties:
>    compatible should be one of the following:
>    	     "ti,emif-am3352"
>  	     "ti,emif-am4372"
> +	     "ti,emif-dra7xx"
> +	     "ti,emif-keystone"
>  
>  - phy-type	: <u32> indicating the DDR phy type. Following are the
>    allowed values
> @@ -22,6 +26,7 @@ Required properties:
>  - ti,hwmods	: For TI hwmods processing and omap device creation
>    the value shall be "emif<n>" where <n> is the number of the EMIF
>    instance with base 1.
> +- interrupts	: interrupt used by the controller

Only for the new compatibles?

>  
>  Required only for "ti,emif-am3352" and "ti,emif-am4372":
>  - sram			: Phandles for generic sram driver nodes,
> @@ -71,3 +76,9 @@ emif: emif@4c000000 {
>          sram = <&pm_sram_code
>                  &pm_sram_data>;
>  };
> +
> +emif1: emif@4c000000 {
> +	compatible = "ti,emif-dra7xx";
> +	reg = <0x4c000000 0x200>;
> +	interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> +};
> -- 
> 1.9.1
> 
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux