In some IP implementations the reading of the phy-type may be broken.
One example are the Rockchip rk3228 and rk3328 socs that use a separate
phy from Innosilicon but still report the HDMI20_TX type.
So allow the glue driver to force a specific type, like the vendor-phy
for these cases.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 +++-
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index f9802399cc0d..50d231626c4d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2218,7 +2218,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
unsigned int i;
u8 phy_type;
- phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
+ phy_type = (hdmi->plat_data->phy_force_type) ?
+ hdmi->plat_data->phy_force_type :
+ hdmi_readb(hdmi, HDMI_CONFIG2_ID);
if (phy_type == DW_HDMI_PHY_VENDOR_PHY) {
/* Vendor PHYs require support from the glue layer. */
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index dd2a8cf7d20b..3c1dddb09b95 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -133,6 +133,7 @@ struct dw_hdmi_plat_data {
const struct dw_hdmi_phy_ops *phy_ops;
const char *phy_name;
void *phy_data;
+ u8 phy_force_type;
/* Synopsys PHY support */
const struct dw_hdmi_mpll_config *mpll_cfg;
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
