This patch adds support for RTC on STM32H743 SoC.
It also adds dt-bindings/interrupt-controller/irq.h include and uses it to
configure RTC alarm interrupt.
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32h743.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 38d7cb8..b4487d1 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -44,6 +44,7 @@
#include "armv7-m.dtsi"
#include <dt-bindings/clock/stm32h7-clks.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
clocks {
@@ -326,6 +327,20 @@
status = "disabled";
};
+ rtc: rtc@58004000 {
+ compatible = "st,stm32h7-rtc";
+ reg = <0x58004000 0x400>;
+ clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+ clock-names = "pclk", "rtc_ck";
+ assigned-clocks = <&rcc RTC_CK>;
+ assigned-clock-parents = <&rcc LSE_CK>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg>;
+ status = "disabled";
+ };
+
rcc: reset-clock-controller@58024400 {
compatible = "st,stm32h743-rcc", "st,stm32-rcc";
reg = <0x58024400 0x400>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
