On Monday 29 January 2018 01:52 AM, Martin Blumenstingl wrote: > This contains two fixes and two (minor) fixes for the phy-meson-gxl-usb2 > driver: > - a clock and reset line is used for the PHYs. this was not clear from > the Amlogic GPL kernel sources since the clock is enabled very early > in the boot process (either because the hardware defaults to "on", > the bootrom enables it or a bootloader before BL3-3/u-boot enables it) > - we don't read the controller's dr_mode anymore because the USB2 PHY > can only be switched into host mode if the USB3 PHY knows about it. > Thus auto-detecting the mode doesn't work for this PHY so it's removed > in patch #3 > - do not log an error message when the phy-supply is not ready yet and > we have to return -EPROBE_DEFER > - improve the naming of some U2P_R2 test mode registers merged, thanks! -Kishon > > > Martin Blumenstingl (5): > dt-bindings: phy: meson-gxl-usb2-phy: add the reset line and clock > phy: amlogic: phy-meson-gxl-usb2: support the clock and reset line > phy: amlogic: phy-meson-gxl-usb2: default to host mode > phy: amlogic: phy-meson-gxl-usb2: don't log an error on -EPROBE_DEFER > phy: amlogic: phy-meson-gxl-usb2: rename some of the U2P_R2 registers > > .../devicetree/bindings/phy/meson-gxl-usb2-phy.txt | 4 ++ > drivers/phy/amlogic/Kconfig | 1 - > drivers/phy/amlogic/phy-meson-gxl-usb2.c | 78 ++++++++++++++++------ > 3 files changed, 61 insertions(+), 22 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
