Re: [PATCH v13 7/8] ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/02/18 18:55, Tim Harvey wrote:
> The GW54xx has a front-panel microHDMI connector routed to a TDA19971
> which is connected the the IPU CSI when using IMX6Q.

I assume that this and the next patch go through another subsystem for arm
and/or imx?

Regards,

	Hans

> 
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> ---
> v5:
>  - remove leading 0 from unit address
>  - add newline between property list and child node
> 
> v4: no changes
> v3: no changes
> 
> v2:
>  - add HDMI audio input support
> 
>  arch/arm/boot/dts/imx6q-gw54xx.dts    | 105 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-gw54xx.dtsi |  29 +++++++++-
>  2 files changed, 131 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
> index 56e5b50..0477120 100644
> --- a/arch/arm/boot/dts/imx6q-gw54xx.dts
> +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
> @@ -12,10 +12,30 @@
>  /dts-v1/;
>  #include "imx6q.dtsi"
>  #include "imx6qdl-gw54xx.dtsi"
> +#include <dt-bindings/media/tda1997x.h>
>  
>  / {
>  	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
>  	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
> +
> +	sound-digital {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "tda1997x-audio";
> +
> +		simple-audio-card,dai-link@0 {
> +			format = "i2s";
> +
> +			cpu {
> +				sound-dai = <&ssi2>;
> +			};
> +
> +			codec {
> +				bitclock-master;
> +				frame-master;
> +				sound-dai = <&tda1997x>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c3 {
> @@ -35,6 +55,61 @@
>  			};
>  		};
>  	};
> +
> +	tda1997x: codec@48 {
> +		compatible = "nxp,tda19971";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tda1997x>;
> +		reg = <0x48>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +		DOVDD-supply = <&reg_3p3v>;
> +		AVDD-supply = <&sw4_reg>;
> +		DVDD-supply = <&sw4_reg>;
> +		#sound-dai-cells = <0>;
> +		nxp,audout-format = "i2s";
> +		nxp,audout-layout = <0>;
> +		nxp,audout-width = <16>;
> +		nxp,audout-mclk-fs = <128>;
> +		/*
> +		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
> +		 * and Y[11:4] across 16bits in the same cycle
> +		 * which we map to VP[15:08]<->CSI_DATA[19:12]
> +		 */
> +		nxp,vidout-portcfg =
> +			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
> +			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
> +			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
> +			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
> +			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
> +			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
> +			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
> +			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
> +
> +		port {
> +			tda1997x_to_ipu1_csi0_mux: endpoint {
> +				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
> +				bus-width = <16>;
> +				hsync-active = <1>;
> +				vsync-active = <1>;
> +				data-active = <1>;
> +			};
> +		};
> +	};
> +};
> +
> +&ipu1_csi0_from_ipu1_csi0_mux {
> +	bus-width = <16>;
> +};
> +
> +&ipu1_csi0_mux_from_parallel_sensor {
> +	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
> +	bus-width = <16>;
> +};
> +
> +&ipu1_csi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ipu1_csi0>;
>  };
>  
>  &ipu2_csi1_from_ipu2_csi1_mux {
> @@ -63,6 +138,30 @@
>  		>;
>  	};
>  
> +	pinctrl_ipu1_csi0: ipu1_csi0grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
> +			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
> +			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
> +			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
> +			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
> +		>;
> +	};
> +
>  	pinctrl_ipu2_csi1: ipu2_csi1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
> @@ -78,4 +177,10 @@
>  			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
>  		>;
>  	};
> +
> +	pinctrl_tda1997x: tda1997xgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
> +		>;
> +	};
>  };
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index eab75f3..f9e1fb9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -10,6 +10,7 @@
>   */
>  
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
>  
>  / {
>  	/* these are used by bootloader for disabling nodes */
> @@ -114,12 +115,12 @@
>  		};
>  	};
>  
> -	sound {
> +	sound-analog {
>  		compatible = "fsl,imx6q-ventana-sgtl5000",
>  			     "fsl,imx-audio-sgtl5000";
>  		model = "sgtl5000-audio";
>  		ssi-controller = <&ssi1>;
> -		audio-codec = <&codec>;
> +		audio-codec = <&sgtl5000>;
>  		audio-routing =
>  			"MIC_IN", "Mic Jack",
>  			"Mic Jack", "Mic Bias",
> @@ -133,6 +134,25 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
>  	status = "okay";
> +
> +	ssi2 {
> +		fsl,audmux-port = <1>;
> +		fsl,port-config = <
> +			(IMX_AUDMUX_V2_PTCR_TFSDIR |
> +			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
> +			IMX_AUDMUX_V2_PTCR_TCLKDIR |
> +			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
> +			IMX_AUDMUX_V2_PTCR_SYN)
> +			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
> +		>;
> +	};
> +
> +	aud5 {
> +		fsl,audmux-port = <4>;
> +		fsl,port-config = <
> +			IMX_AUDMUX_V2_PTCR_SYN
> +			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
> +	};
>  };
>  
>  &can1 {
> @@ -331,7 +351,7 @@
>  	pinctrl-0 = <&pinctrl_i2c3>;
>  	status = "okay";
>  
> -	codec: sgtl5000@a {
> +	sgtl5000: codec@a {
>  		compatible = "fsl,sgtl5000";
>  		reg = <0x0a>;
>  		clocks = <&clks IMX6QDL_CLK_CKO>;
> @@ -475,6 +495,9 @@
>  			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
>  			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
>  			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
> +			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
> +			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
> +			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
>  		>;
>  	};
>  
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux