Am Mittwoch, 14. Februar 2018, 17:54:43 CET schrieb Enric Balletbo i Serra: > As now the following register properties are in the driver, document as > deprecated these properties and recommend to not use them on new bindings. > > The deprecated properties are: > > - rockchip,typec-conn-dir : the register of type-c connector direction > - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 > enable control. > - rockchip,external-psm : the register of type-c phy external psm clock > selection. > - rockchip,pipe-status : the register of type-c phy pipe status. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> > --- > Changes since v1: > - This patch is new on these series and is just a documentation update > due patch [1/6] > > .../devicetree/bindings/phy/phy-rockchip-typec.txt | 33 +++++----------------- > 1 file changed, 7 insertions(+), 26 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > index 6ea867e3176f..bc44d6abe283 100644 > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > @@ -16,24 +16,6 @@ Required properties: > "uphy", "uphy-pipe", "uphy-tcphy" > - extcon : extcon specifier for the Power Delivery > > -Note, there are 2 type-c phys for RK3399, and they are almost identical, except > -these registers(description below), every register node contains 3 sections: > -offset, enable bit, write mask bit. > - - rockchip,typec-conn-dir : the register of type-c connector direction, > - for type-c phy0, it must be <0xe580 0 16>; > - for type-c phy1, it must be <0xe58c 0 16>; > - - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable > - control. > - for type-c phy0, it must be <0xe580 3 19>; > - for type-c phy1, it must be <0xe58c 3 19>; > - - rockchip,external-psm : the register of type-c phy external psm clock > - selection. > - for type-c phy0, it must be <0xe588 14 30>; > - for type-c phy1, it must be <0xe594 14 30>; > - - rockchip,pipe-status : the register of type-c phy pipe status. > - for type-c phy0, it must be <0xe5c0 0 0>; > - for type-c phy1, it must be <0xe5c0 16 16>; > - > Required nodes : a sub-node is required for each port the phy provides. > The sub-node name is used to identify dp or usb3 port, > and shall be the following entries: > @@ -43,6 +25,13 @@ Required nodes : a sub-node is required for each port the phy provides. > Required properties (port (child) node): > - #phy-cells : must be 0, See ./phy-bindings.txt for details. > > +Deprecated properties, do not use in new device tree sources, these > +properties are now in the driver: nit: "[...] these properties are determined by the compatible value" ? A dt-binding does not care about drivers ;-) Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
