Certain hardware configurations, like dra76x, have some of the clock
registers partitioned in a funky manner that requires the clock
control setup to be latched for PRCM to be notified of the change. This
is accomplished with a separate control bit under the register. Add
support for this clock latching support to divider and mux clocks.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
Documentation/devicetree/bindings/clock/ti/divider.txt | 3 +++
Documentation/devicetree/bindings/clock/ti/mux.txt | 3 +++
2 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
index 35a6f5c..9b13b32 100644
--- a/Documentation/devicetree/bindings/clock/ti/divider.txt
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -75,6 +75,9 @@ Optional properties:
- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
see [2]
- ti,set-rate-parent : clk_set_rate is propagated to parent
+- ti,latch-bit : latch the divider value to HW, only needed if the register
+ access requires this. As an example dra76x DPLL_GMAC H14 divider implements
+ such behavior.
Examples:
dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index 2d0d170..eec8994 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -48,6 +48,9 @@ Optional properties:
zero
- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
not supported by the composite-mux-clock subtype
+- ti,latch-bit : latch the mux value to HW, only needed if the register
+ access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+ implements such behavior.
Examples:
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
