[PATCH v3 4/5] dmaengine: qcom: bam_dma: do not write to global regs in remote mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

BAM_DESC_CNT_TRSHLD register is global register, which can only be written
when BAM is in master mode, So check the mode of operation before writing
it.

Without this check SOC's xPU would catch such access and crash the system.
First noticed on DB820c while testing SLIMBus BAM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 drivers/dma/qcom/bam_dma.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 139e9f5e47a9..6919f501b9f3 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -935,12 +935,15 @@ static void bam_apply_new_config(struct bam_chan *bchan,
 	struct bam_device *bdev = bchan->bdev;
 	u32 maxburst;
 
-	if (dir == DMA_DEV_TO_MEM)
-		maxburst = bchan->slave.src_maxburst;
-	else
-		maxburst = bchan->slave.dst_maxburst;
+	if (!bdev->controlled_remotely) {
+		if (dir == DMA_DEV_TO_MEM)
+			maxburst = bchan->slave.src_maxburst;
+		else
+			maxburst = bchan->slave.dst_maxburst;
 
-	writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+		writel_relaxed(maxburst,
+			       bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+	}
 
 	bchan->reconfigure = 0;
 }
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux