Re: [RFC PATCH v2 4/6] arm64: dts: exynos: add OF graph between MHL and USB connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 15, 2018 at 11:39 AM, Andrzej Hajda <a.hajda@xxxxxxxxxxx> wrote:
> OF graph describes MHL data lanes between MHL and respective USB
> connector.
>
> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> ---
>  .../boot/dts/exynos/exynos5433-tm2-common.dtsi     | 31 +++++++++++++++++++---
>  1 file changed, 28 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index 7e49fadee412..ef758f7337e9 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -779,9 +779,22 @@
>                 clocks = <&pmu_system_controller 0>;
>                 clock-names = "xtal";
>
> -               port {
> -                       mhl_to_hdmi: endpoint {
> -                               remote-endpoint = <&hdmi_to_mhl>;
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +                               mhl_to_hdmi: endpoint {
> +                                       remote-endpoint = <&hdmi_to_mhl>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +                               mhl_to_musb_con: endpoint {
> +                                       remote-endpoint = <&musb_con_to_mhl>;
> +                               };
>                         };
>                 };
>         };
> @@ -804,6 +817,18 @@
>                                              "usb-b-connector";
>                                 label = "micro-USB";
>                                 type = "micro";
> +
> +                               ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       port@3 {

I think you might need here "reg = <3>". Doesn't it produce a warning now?

BR,
Krzysztof

> +                                               musb_con_to_mhl: endpoint {
> +                                                       remote-endpoint = <&mhl_to_musb_con>;
> +                                               };
> +                                       };
> +                               };
> +                       };
>                         };
>                 };
>
> --
> 2.16.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux