Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
Hi Rafael,
Thanks for checking again.
Just a few minor nits below.
---
drivers/acpi/arm64/Makefile | 1 +
drivers/acpi/arm64/acpi_indirectio.c | 250 +++++++++++++++++++++++++++++++++++
drivers/acpi/internal.h | 5 +
drivers/acpi/scan.c | 1 +
4 files changed, 257 insertions(+)
create mode 100644 drivers/acpi/arm64/acpi_indirectio.c
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
index 1017def..f4a7f46 100644
--- a/drivers/acpi/arm64/Makefile
+++ b/drivers/acpi/arm64/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_ACPI_IORT) += iort.o
obj-$(CONFIG_ACPI_GTDT) += gtdt.o
+obj-$(CONFIG_INDIRECT_PIO) += acpi_indirectio.o
diff --git a/drivers/acpi/arm64/acpi_indirectio.c b/drivers/acpi/arm64/acpi_indirectio.c
new file mode 100644
index 0000000..51a1b92
--- /dev/null
+++ b/drivers/acpi/arm64/acpi_indirectio.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 HiSilicon Limited, All Rights Reserved.
+ * Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
+ * Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
+ * Author: John Garry <john.garry@xxxxxxxxxx>
+ *
+ * This file implements functunality to scan the ACPI namespace and config
+ * devices under "indirect IO" hosts. An "indirect IO" host allows child
+ * devices to use logical IO accesses when the host, itself, does not provide
+ * a transparent bridge. The device setup creates a per-child MFD with a
+ * logical port IO resource.
+ */
+
+#include <linux/acpi.h>
+#include <linux/logic_pio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+
+ACPI_MODULE_NAME("indirect IO");
+
+#define ACPI_INDIRECT_IO_NAME_LEN 255
+
+struct acpi_indirect_io_mfd_cell {
+ struct mfd_cell_acpi_match acpi_match;
+ char name[ACPI_INDIRECT_IO_NAME_LEN];
+ char pnpid[ACPI_INDIRECT_IO_NAME_LEN];
+};
+
+static int acpi_indirect_io_xlat_res(struct acpi_device *adev,
+ struct acpi_device *host,
+ struct resource *res)
+{
+ unsigned long sys_port;
+ resource_size_t len = res->end - res->start;
+
+ sys_port = logic_pio_trans_hwaddr(&host->fwnode, res->start, len);
+ if (sys_port == -1UL)
+ return -EFAULT;
+
+ res->start = sys_port;
+ res->end = sys_port + len;
+
+ return 0;
+}
+
+/*
+ * acpi_indirect_io_set_res - set the resources for a child device
+ * (MFD) of an "indirect IO" host.
The above should fit into a single line.
I'd make it something like "acpi_indirect_io_set_res - set "indirect
IO" host child (MFD) resources" and it already is explained in the
comment below.
Fine
+ * @child: the device node to be updated the I/O resource
+ * @hostdev: the device node associated with the "indirect IO" host
+ * @res: double pointer to be set to the address of translated resources
+ * @num_res: pointer to variable to hold the number of translated resources
+ *
+ * Returns 0 when successful, and a negative value for failure.
+ *
+ * For a given "indirect IO" host, each child device will have associated
+ * host-relevative address resource. This function will return the translated
host-relative
right
+ * logical PIO addresses for each child devices resources.
+ */
+static int acpi_indirect_io_set_res(struct device *child,
+ struct device *hostdev,
+ const struct resource **res,
+ int *num_res)
+{
+ struct acpi_device *adev;
+ struct acpi_device *host;
+ struct resource_entry *rentry;
+ LIST_HEAD(resource_list);
+ struct resource *resources;
+ int count;
+ int i;
+ int ret = -EIO;
+
+ if (!child || !hostdev)
+ return -EINVAL;
+
+ host = to_acpi_device(hostdev);
+ adev = to_acpi_device(child);
+
+ /* check the device state */
+ if (!adev->status.present) {
+ dev_info(child, "device is not present\n");
dev_dbg()?
+ return 0;
+ }
+ /* whether the child had been enumerated? */
+ if (acpi_device_enumerated(adev)) {
+ dev_info(child, "had been enumerated\n");
Again, dev_dbg()?
sure, I think that these can be downgraded
+ return 0;
+ }
+
+ count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (count <= 0) {
+ dev_err(child, "failed to get resources\n");
I'd use dev_dbg() here too (the message may not even be meaningful to a user).
I think that it could be ok - having no resources is not really an "error".
+ return count ? count : -EIO;
+ }
+
+ resources = kcalloc(count, sizeof(*resources), GFP_KERNEL);
+ if (!resources) {
And you don't print anything here, I wonder why?
As I see, we generally don't print out-of-memory failure as we expect
the alloc code to do it.
But I agree it's useful as we know the point of failure in the driver
and can add diagnostic info like count value, as maybe we're trying to
allocate a huge amount of memory.
+ acpi_dev_free_resource_list(&resource_list);
+ return -ENOMEM;
+ }
+ count = 0;
+ list_for_each_entry(rentry, &resource_list, node)
+ resources[count++] = *rentry->res;
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ /* translate the I/O resources */
+ for (i = 0; i < count; i++) {
+ if (!(resources[i].flags & IORESOURCE_IO))
+ continue;
+ ret = acpi_indirect_io_xlat_res(adev, host, &resources[i]);
+ if (ret) {
+ kfree(resources);
+ dev_err(child, "translate IO range failed(%d)\n", ret);
+ return ret;
+ }
+ }
+ *res = resources;
+ *num_res = count;
+
+ return ret;
+}
+
+/*
+ * acpi_indirect_io_setup - scan handler for "indirect IO" host.
+ * @adev: "indirect IO" host ACPI device pointer
One extra empty comment line here, please.
ok
+ * Returns 0 when successful, and a negative value for failure.
+ *
+ * Setup an "indirect IO" host by scanning all child devices, and
+ * create a per-device MFD with logical PIO translated IO resources.
+ */
+static int acpi_indirect_io_setup(struct acpi_device *adev)
+{
+ struct platform_device *pdev;
+ struct mfd_cell *mfd_cells;
+ struct logic_pio_hwaddr *range;
+ struct acpi_device *child;
+ struct acpi_indirect_io_mfd_cell *acpi_indirect_io_mfd_cells;
+ int size, ret, count = 0, cell_num = 0;
+
+ range = kzalloc(sizeof(*range), GFP_KERNEL);
+ if (!range)
+ return -ENOMEM;
+ range->fwnode = &adev->fwnode;
+ range->flags = PIO_INDIRECT;
+ range->size = PIO_INDIRECT_SIZE;
+
+ ret = logic_pio_register_range(range);
+ if (ret)
+ goto free_range;
+
+ list_for_each_entry(child, &adev->children, node)
+ cell_num++;
+
+ /* allocate the mfd cell and companion acpi info, one per child */
+ size = sizeof(*mfd_cells) + sizeof(*acpi_indirect_io_mfd_cells);
+ mfd_cells = kcalloc(cell_num, size, GFP_KERNEL);
+ if (!mfd_cells) {
+ ret = -ENOMEM;
+ goto free_range;
+ }
+
+ acpi_indirect_io_mfd_cells = (struct acpi_indirect_io_mfd_cell *)
+ &mfd_cells[cell_num];
+ /* Only consider the children of the host */
+ list_for_each_entry(child, &adev->children, node) {
+ struct mfd_cell *mfd_cell = &mfd_cells[count];
+ struct acpi_indirect_io_mfd_cell *acpi_indirect_io_mfd_cell =
+ &acpi_indirect_io_mfd_cells[count];
+ const struct mfd_cell_acpi_match *acpi_match =
+ &acpi_indirect_io_mfd_cell->acpi_match;
+ char *name = &acpi_indirect_io_mfd_cell[count].name[0];
+ char *pnpid = &acpi_indirect_io_mfd_cell[count].pnpid[0];
+ struct mfd_cell_acpi_match match = {
+ .pnpid = pnpid,
+ };
+
+ snprintf(name, ACPI_INDIRECT_IO_NAME_LEN, "indirect-io-%s",
+ acpi_device_hid(child));
+ snprintf(pnpid, ACPI_INDIRECT_IO_NAME_LEN, "%s",
+ acpi_device_hid(child));
+
+ memcpy((void *)acpi_match, (void *)&match, sizeof(*acpi_match));
+ mfd_cell->name = name;
+ mfd_cell->acpi_match = acpi_match;
+
+ ret = acpi_indirect_io_set_res(&child->dev, &adev->dev,
+ &mfd_cell->resources,
+ &mfd_cell->num_resources);
+ if (ret) {
+ dev_err(&child->dev, "set resource failed (%d)\n", ret);
Again, please consider using dev_dbg() here and below (for the same
reason as above).
well if this happens the device is not enumerated, so I think a warn may
be more appropiate
+ goto free_mfd_resources;
+ }
+ count++;
+ }
+
+ pdev = acpi_create_platform_device(adev, NULL);
+ if (IS_ERR_OR_NULL(pdev)) {
+ dev_err(&adev->dev, "create platform device for host failed\n");
as above
+ ret = PTR_ERR(pdev);
+ goto free_mfd_resources;
+ }
+ acpi_device_set_enumerated(adev);
+
+ ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ mfd_cells, cell_num, NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add mfd cells (%d)\n", ret);
+ goto free_mfd_resources;
+ }
+
+ return ret;
return 0;
You know that ret must be 0 here anyway.
yes, I prefer this
+
+free_mfd_resources:
+ while (cell_num--)
+ kfree(mfd_cells[cell_num].resources);
+ kfree(mfd_cells);
+free_range:
+ kfree(range);
+
+ return ret;
+}
+
+/* All the host devices which apply indirect-IO can be listed here. */
+static const struct acpi_device_id acpi_indirect_io_host_id[] = {
+ {}
+};
+
+static int acpi_indirect_io_attach(struct acpi_device *adev,
+ const struct acpi_device_id *id)
+{
+ int ret = acpi_indirect_io_setup(adev);
+
+ if (ret < 0)
+ return ret;
+
+ return 1;
The above can be written as
return ret < 0 ? ret : 1;
to save a few lines of code (you are using this pattern above, so why
not here?).
I can change it.
+}
+
+static struct acpi_scan_handler acpi_indirect_io_handler = {
+ .ids = acpi_indirect_io_host_id,
+ .attach = acpi_indirect_io_attach,
+};
+
+void __init acpi_indirect_io_scan_init(void)
+{
+ acpi_scan_add_handler(&acpi_indirect_io_handler);
+}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 1d0a501..680f3cf 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -31,6 +31,11 @@
void acpi_platform_init(void);
void acpi_pnp_init(void);
void acpi_int340x_thermal_init(void);
+#ifdef CONFIG_INDIRECT_PIO
+void acpi_indirect_io_scan_init(void);
+#else
+static inline void acpi_indirect_io_scan_init(void) {}
+#endif
#ifdef CONFIG_ARM_AMBA
void acpi_amba_init(void);
#else
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8e63d93..204da8a 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -2155,6 +2155,7 @@ int __init acpi_scan_init(void)
acpi_amba_init();
acpi_watchdog_init();
acpi_init_lpit();
+ acpi_indirect_io_scan_init();
acpi_scan_add_handler(&generic_device_handler);
--
But generally
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
for the generic ACPI changes.
Thanks,
John
.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
