Re: [PATCH v3 01/25] dt-bindings: soc: qcom: Add bindings for APR bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the review,

On 13/02/18 23:12, Rob Herring wrote:
On Tue, Feb 13, 2018 at 04:58:13PM +0000, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

This patch add dt bindings for Qualcomm APR (Asynchronous Packet Router)
bus driver. This bus is used for communicating with DSP which provides
audio and various other services to cpu.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
  .../devicetree/bindings/soc/qcom/qcom,apr.txt      | 83 ++++++++++++++++++++++
  1 file changed, 83 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
new file mode 100644
index 000000000000..1b95fbfed348
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -0,0 +1,83 @@
+Qualcomm APR (Asynchronous Packet Router) binding
+
+This binding describes the Qualcomm APR. APR is a IPC protocol for
+communication between Application processor and QDSP. APR is mainly
+used for audio/voice services on the QDSP.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
+
+- qcom,apr-dest-domain-id
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Destination processor ID.
+	Possible values are :
+			1 - APR simulator
+			2 - PC
+			3 - MODEM
+			4 - ADSP
+			5 - APPS
+			6 - MODEM2
+			7 - APPS2
+
+= APR SERVICES
+Each subnode of the APR node can represent service tied to this apr. The name
+of the nodes are not important. The properties of these nodes are defined
+by the individual bindings for the specific service
+- but must contain the following property:
+
...
+= APR DEVICES:
+Each subnode of the APR node can represent devices tied to this apr, like
+sound-card. The properties of these nodes are defined by the individual
+bindings for the specific device.

It's not a good design generally to mix different types of nodes at one
level.

I agree, may be I can split the services and devices into different subnodes like below, which should avoid mixing different types of nodes.

Does this sound good to you?

apr {
        compatible = "qcom,apr-v2";
        qcom,smd-channels = "apr_audio_svc";
        qcom,apr-dest-domain-id = <APR_DOMAIN_ADSP>;

        apr-services {
                q6core {
                        qcom,apr-svc-name = "CORE";
                        qcom,apr-svc-id = <APR_SVC_ADSP_CORE>;
                        compatible = "qcom,q6core";
                };

                q6afe: q6afe {
                        compatible = "qcom,q6afe";
                        qcom,apr-svc-name = "AFE";
                        qcom,apr-svc-id = <APR_SVC_AFE>;
                        #sound-dai-cells = <1>;
                };

                q6asm: q6asm {
                        compatible = "qcom,q6asm";
                        qcom,apr-svc-name = "ASM";
                        qcom,apr-svc-id = <APR_SVC_ASM>;
                        #sound-dai-cells = <1>;
                };

                q6adm: q6adm {
                        compatible = "qcom,q6adm";
                        qcom,apr-svc-name = "ADM";
                        qcom,apr-svc-id = <APR_SVC_ADM>;
                        #sound-dai-cells = <0>;
                };
        };

        apr-devices {
                audio {
                        compatible = "qcom,msm8996-snd-card";
                        ...
                };
        };
};





+
+= EXAMPLE
+The following example represents a QDSP based sound card on a MSM8996 device
+which uses apr as communication between Apps and QDSP.
+
+	apr {
+		compatible = "qcom,apr-v2";
+		qcom,smd-channels = "apr_audio_svc";
+		qcom,apr-dest-domain-id = <APR_DOMAIN_ADSP>;
+
+		q6core {
+			compatible = "qcom,q6core";
+			qcom,apr-svc-name = "CORE";
+			qcom,apr-svc-id = <APR_SVC_ADSP_CORE>;
+		};
+
+		q6afe {
+			compatible = "qcom,q6afe";
+			qcom,apr-svc-name = "AFE";
+			qcom,apr-svc-id = <APR_SVC_AFE>;
+		};
+
+		audio {
+			compatible = "qcom,msm8996-snd-card";
+			...
+		};
+	};
--
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux