Re: [PATCH 0/3] Fix broken bananapi m2 devicetree/regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/11/2018 02:30 PM, Philipp Rossak wrote:
Am Sonntag, den 11.02.2018, 10:55 +0300 schrieb Sergey Suloev:
On 02/11/2018 01:07 AM, Philipp Rossak wrote:

On 10.02.2018 22:08, Sergey Suloev wrote:
On 02/11/2018 12:01 AM, Philipp Rossak wrote:
Hey Sergey,

Thanks for mentioning, but I think the problem has nothing to
do
with those patches. I tested them with the v4.15.0 Kernel since
this
is the last stable release and we are right now in the merging
window.

I tested the latest mainline, without those patches and the
kernel
is not booting (I can't see any uart output).

Thanks,
Philipp

On 10.02.2018 14:56, Sergey Suloev wrote:
On 02/09/2018 08:52 PM, Philipp Rossak wrote:
This patchseries fixes the bananapi m1 devicetree, to be
able to
boot again.
The first two patches update/improve the devicetree and the
last
patch adds
all missing regulators.

Regards,
Philipp

Philipp Rossak (3):
    arm: dts: sun6i: a31s: bpi-m2: update mmc supply nodes
    arm: dts: sun6i: a31s: bpi-m2: improve pmic properties
    arm: dts: sun6i: a31s: fix: bpi-m2: add missing
regulators

   arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 70
+++++++++++++++++++++++-
   1 file changed, 67 insertions(+), 3 deletions(-)

patches are not working

Thanks

same problem, but after applying the patches my device is till
hanging.


Can you please share a bootlog? Here is mine [1]. As you can see
I'm
able to boot.
I build it with this branch [2]. For testing you should replace
the
dtb and the uImage/zImage

Philipp


[1]: https://pastebin.com/mVjv3LDf
[2]:
https://github.com/embed-3d/linux/tree/testing/bpi-m2-regulator-tes
t-2
My dmesg is very similar to yours unless it hangs on the last line
[1].
For this test I used kernel from tag v4.15 with no additional
patching.

[1] https://pastebin.com/3a6bk5Dk


For me it looks like you have a different kernel and also an different
dtb that you patch! And you are applying also a fixup script.
These patches should be applied on top of linux mainline.

fixup script:
Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr)


Linux versions:
4.15.0-00003-g1bbe5edde691   vs   4.15.0-sunxi-dirty

In addition to that you are also booting into fb/hdmi.

If you use my branch (uImage and dtb) and replace the current boot.cmd
with this (to get the boot.scr you need to use mkimage) it should work:

setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
panic=10
load mmc 0:1 0x43000000 ${fdtfile} || load mmc 0:1 0x43000000
boot/${fdtfile}
load mmc 0:1 0x42000000 uImage || load mmc 0:1 0x42000000 boot/uImage
bootm 0x42000000 - 0x43000000

the script is doing nothing, it is empty. The problem is related to hdmi.

The following dts code makes it happen:

&hdmi {
        status = "okay";
};


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux