This patch sets initial buck regulator modes explicitly to a state this hardware needs. So a wrong initial mode set by bootloader or pmic itself does not interfere anymore. Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx> Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 53e4337..2ad1336 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -109,6 +109,7 @@ regulator-name = "vdd_arm"; regulator-min-microvolt = <730000>; regulator-max-microvolt = <1380000>; + regulator-initial-mode = <2>; /* SYNC */ regulator-always-on; }; @@ -116,6 +117,7 @@ regulator-name = "vdd_soc"; regulator-min-microvolt = <730000>; regulator-max-microvolt = <1380000>; + regulator-initial-mode = <2>; /* SYNC */ regulator-always-on; }; @@ -123,6 +125,7 @@ regulator-name = "vdd_ddr3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + regulator-initial-mode = <2>; /* SYNC */ regulator-always-on; }; @@ -130,6 +133,7 @@ regulator-name = "vdd_eth"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-initial-mode = <2>; /* SYNC */ regulator-always-on; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
