Re: [PATCH v4 2/5] dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/08/2018 09:58 AM, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
> 
> MediaTek High-Speed DMA controller (HSDMA) on MT7622 and MT7623 SoC has
> a single ring is dedicated to memory-to-memory transfer through ring based
> descriptor management.
> 
> Even though there is only one physical ring available inside HSDMA, the
> driver can be easily extended to the support of multiple virtual channels
> processing simultaneously by means of DMA_VIRTUAL_CHANNELS effort.
> 
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> ---
>  drivers/dma/Kconfig              |    2 +
>  drivers/dma/Makefile             |    1 +
>  drivers/dma/mediatek/Kconfig     |   13 +
>  drivers/dma/mediatek/Makefile    |    1 +
>  drivers/dma/mediatek/mtk-hsdma.c | 1046 ++++++++++++++++++++++++++++++++++++++
>  5 files changed, 1063 insertions(+)
>  create mode 100644 drivers/dma/mediatek/Kconfig
>  create mode 100644 drivers/dma/mediatek/Makefile
>  create mode 100644 drivers/dma/mediatek/mtk-hsdma.c
> 

> diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> new file mode 100644
> index 0000000..27bac0b
> --- /dev/null
> +++ b/drivers/dma/mediatek/Kconfig
> @@ -0,0 +1,13 @@
> +
> +config MTK_HSDMA
> +	tristate "MediaTek High-Speed DMA controller support"
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	select DMA_ENGINE
> +	select DMA_VIRTUAL_CHANNELS
> +	---help---
> +	  Enable support for High-Speed DMA controller on MediaTek
> +	  SoCs.
> +
> +	  This controller provides the channels which is dedicated to

	                                              are dedicated to

> +	  memory-to-memory transfer to offload from CPU through ring-
> +	  based descriptor management.

> diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> new file mode 100644
> index 0000000..d394fc6
> --- /dev/null
> +++ b/drivers/dma/mediatek/mtk-hsdma.c
> @@ -0,0 +1,1046 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for MediaTek High-Speed DMA Controller
> + *
> + * Copyright (c) 2017-2018 MediaTek Inc.
> + * Author: Sean Wang <sean.wang@xxxxxxxxxxxx>
> + *
> + */
> +

#include <linux/bitops.h>
for BIT() macro usage.

> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>
> +#include <linux/jiffies.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/refcount.h>
> +#include <linux/slab.h>
> +
> +#include "../virt-dma.h"
> +
> +#define MTK_DMA_DEV KBUILD_MODNAME
> +
> +#define MTK_HSDMA_USEC_POLL		20
> +#define MTK_HSDMA_TIMEOUT_POLL		200000
> +#define MTK_HSDMA_DMA_BUSWIDTHS		BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED)
> +
> +/* The default number of virtual channel */
> +#define MTK_HSDMA_NR_VCHANS		3
> +
> +/* Only one physical channel supported */
> +#define MTK_HSDMA_NR_MAX_PCHANS		1
> +
> +/* Macro for physical descriptor (PD) manipulation */
> +/* The number of PD which must be 2 of power */
> +#define MTK_DMA_SIZE			64
> +#define MTK_HSDMA_NEXT_DESP_IDX(x, y)	(((x) + 1) & ((y) - 1))
> +#define MTK_HSDMA_LAST_DESP_IDX(x, y)	(((x) - 1) & ((y) - 1))
> +#define MTK_HSDMA_MAX_LEN		0x3f80
> +#define MTK_HSDMA_ALIGN_SIZE		4
> +#define MTK_HSDMA_PLEN_MASK		0x3fff
> +#define MTK_HSDMA_DESC_PLEN(x)		(((x) & MTK_HSDMA_PLEN_MASK) << 16)
> +#define MTK_HSDMA_DESC_PLEN_GET(x)	(((x) >> 16) & MTK_HSDMA_PLEN_MASK)
> +
> +/* Registers for underlying ring manipulation */
> +#define MTK_HSDMA_TX_BASE		0x0
> +#define MTK_HSDMA_TX_CNT		0x4
> +#define MTK_HSDMA_TX_CPU		0x8
> +#define MTK_HSDMA_TX_DMA		0xc
> +#define MTK_HSDMA_RX_BASE		0x100
> +#define MTK_HSDMA_RX_CNT		0x104
> +#define MTK_HSDMA_RX_CPU		0x108
> +#define MTK_HSDMA_RX_DMA		0x10c
> +
> +/* Registers for global setup */
> +#define MTK_HSDMA_GLO			0x204
> +#define MTK_HSDMA_GLO_MULTI_DMA		BIT(10)
> +#define MTK_HSDMA_TX_WB_DDONE		BIT(6)
> +#define MTK_HSDMA_BURST_64BYTES		(0x2 << 4)
> +#define MTK_HSDMA_GLO_RX_BUSY		BIT(3)
> +#define MTK_HSDMA_GLO_RX_DMA		BIT(2)
> +#define MTK_HSDMA_GLO_TX_BUSY		BIT(1)
> +#define MTK_HSDMA_GLO_TX_DMA		BIT(0)
> +#define MTK_HSDMA_GLO_DMA		(MTK_HSDMA_GLO_TX_DMA |	\
> +					 MTK_HSDMA_GLO_RX_DMA)
> +#define MTK_HSDMA_GLO_BUSY		(MTK_HSDMA_GLO_RX_BUSY | \
> +					 MTK_HSDMA_GLO_TX_BUSY)
> +#define MTK_HSDMA_GLO_DEFAULT		(MTK_HSDMA_GLO_TX_DMA | \
> +					 MTK_HSDMA_GLO_RX_DMA | \
> +					 MTK_HSDMA_TX_WB_DDONE | \
> +					 MTK_HSDMA_BURST_64BYTES | \
> +					 MTK_HSDMA_GLO_MULTI_DMA)
> +
> +/* Registers for reset */
> +#define MTK_HSDMA_RESET			0x208
> +#define MTK_HSDMA_RST_TX		BIT(0)
> +#define MTK_HSDMA_RST_RX		BIT(16)
> +
> +/* Registers for interrupt control */
> +#define MTK_HSDMA_DLYINT		0x20c
> +#define MTK_HSDMA_RXDLY_INT_EN		BIT(15)
> +/* Interrupt fires when the pending number's more than the specified */
> +#define MTK_HSDMA_RXMAX_PINT(x)		(((x) & 0x7f) << 8)
> +/* Interrupt fires when the pending time's more than the specified in 20 us */
> +#define MTK_HSDMA_RXMAX_PTIME(x)	((x) & 0x7f)
> +#define MTK_HSDMA_DLYINT_DEFAULT	(MTK_HSDMA_RXDLY_INT_EN | \
> +					 MTK_HSDMA_RXMAX_PINT(20) | \
> +					 MTK_HSDMA_RXMAX_PTIME(20))
> +#define MTK_HSDMA_INT_STATUS		0x220
> +#define MTK_HSDMA_INT_ENABLE		0x228
> +#define MTK_HSDMA_INT_RXDONE		BIT(16)
> +
> +enum mtk_hsdma_vdesc_flag {
> +	MTK_HSDMA_VDESC_FINISHED	= 0x01,
> +};
> +
> +#define IS_MTK_HSDMA_VDESC_FINISHED(x) ((x) == MTK_HSDMA_VDESC_FINISHED)
> +
> +/*
> + * struct mtk_hsdma_pdesc - This is the struct holding info describing physical
> + *			    descriptor (PD) and its placement must be kept at
> + *			    4-bytes alignment in little endian order.
> + * @des[1-4]:		    The control pad used to indicate hardware how to

s/des/desc/

> + *			    deal with the descriptor such as source and
> + *			    destination address and data length. The maximum
> + *			    data length each pdesc can handle is 0x3f80 bytes
> + */
> +struct mtk_hsdma_pdesc {
> +	__le32 desc1;
> +	__le32 desc2;
> +	__le32 desc3;
> +	__le32 desc4;
> +} __packed __aligned(4);
> +

> +/*

/**

> + * struct mtk_hsdma_vdesc - This is the struct holding info describing virtual
> + *			    descriptor (VD)
> + * @vd:			    An instance for struct virt_dma_desc
> + * @len:		    The total data size device wants to move
> + * @residue:		    The remaining data size device will move
> + * @dest:		    The destination address device wants to move to
> + * @src:		    The source address device wants to move from
> + */
> +struct mtk_hsdma_vdesc {
> +	struct virt_dma_desc vd;
> +	size_t len;
> +	size_t residue;
> +	dma_addr_t dest;
> +	dma_addr_t src;
> +};
> +
> +/*
> + * struct mtk_hsdma_cb - This is the struct holding extra info required for RX
> + *			 ring to know what relevant VD the the PD is being
> + *			 mapped to.
> + * @vd:			 Pointer to the relevant VD.

add * @flag: here, please

> + */
> +struct mtk_hsdma_cb {
> +	struct virt_dma_desc *vd;
> +	enum mtk_hsdma_vdesc_flag flag;
> +};
> +
> +/*

/** for kernel-doc comments.

> + * struct mtk_hsdma_ring - This struct holds info describing underlying ring
> + *			   space
> + * @txd:		   The descriptor TX ring which describes DMA source
> + *			   information
> + * @rxd:		   The descriptor RX ring which describes DMA
> + *			   destination information
> + * @cb:			   The extra information pointed at by RX ring
> + * @tphys:		   The physical addr of TX ring
> + * @rphys:		   The physical addr of RX ring
> + * @cur_tptr:		   Pointer to the next free descriptor used by the host
> + * @cur_rptr:		   Pointer to the last done descriptor by the device
> + */
> +struct mtk_hsdma_ring {
> +	struct mtk_hsdma_pdesc *txd;
> +	struct mtk_hsdma_pdesc *rxd;
> +	struct mtk_hsdma_cb *cb;
> +	dma_addr_t tphys;
> +	dma_addr_t rphys;
> +	u16 cur_tptr;
> +	u16 cur_rptr;
> +};
> +

> +/*

s:/*:/**:

> + * struct mtk_hsdma_pchan - This is the struct holding info describing physical
> + *			   channel (PC)
> + * @ring:		   An instance for the underlying ring
> + * @sz_ring:		   Total size allocated for the ring
> + * @nr_free:		   Total number of free rooms in the ring. It would
> + *			   be accessed and updated frequently between IRQ
> + *			   context and user context to reflect whether ring
> + *			   can accept requests from VD.
> + */
> +struct mtk_hsdma_pchan {
> +	struct mtk_hsdma_ring ring;
> +	size_t sz_ring;
> +	atomic_t nr_free;
> +};
> +
> +/*

Use /** for kernel-doc comments.

> + * struct mtk_hsdma_vchan - This is the struct holding info describing virtual
> + *			   channel (VC)
> + * @vc:			   An instance for struct virt_dma_chan
> + * @issue_completion:	   The wait for all issued descriptors completited
> + * @issue_synchronize:	   Bool indicating channel synchronization starts
> + * @desc_hw_processing:	   List those descriptors the hardware is processing
> + */
> +struct mtk_hsdma_vchan {
> +	struct virt_dma_chan vc;
> +	struct completion issue_completion;
> +	bool issue_synchronize;
> +	/* protected by vc.lock */
> +	struct list_head desc_hw_processing;
> +};
> +
> +/*

Use /** to begin a kernel-doc comment block.

> + * struct mtk_hsdma_soc - This is the struct holding differences among SoCs
> + * @ddone:		  Bit mask for DDONE
> + * @ls0:		  Bit mask for LS0
> + */
> +struct mtk_hsdma_soc {
> +	__le32 ddone;
> +	__le32 ls0;
> +};
> +


> +/*

You can use /** to begin this kernel-doc comment block.

> + * struct mtk_hsdma_device - This is the struct holding info describing HSDMA
> + *			     device
> + * @ddev:		     An instance for struct dma_device
> + * @base:		     The mapped register I/O base
> + * @clk:		     The clock that device internal is using
> + * @irq:		     The IRQ that device are using
> + * @dma_requests:	     The number of VCs the device supports to
> + * @vc:			     The pointer to all available VCs
> + * @pc:			     The pointer to the underlying PC
> + * @pc_refcnt:		     Track how many VCs are using the PC
> + * @lock:		     Lock protect agaisting multiple VCs access PC
> + * @soc:		     The pointer to area holding differences among
> + *			     vaious platform
> + */
> +struct mtk_hsdma_device {
> +	struct dma_device ddev;
> +	void __iomem *base;
> +	struct clk *clk;
> +	u32 irq;
> +
> +	u32 dma_requests;
> +	struct mtk_hsdma_vchan *vc;
> +	struct mtk_hsdma_pchan *pc;
> +	refcount_t pc_refcnt;
> +
> +	/* Lock used to protect against multiple VCs access PC */
> +	spinlock_t lock;
> +
> +	const struct mtk_hsdma_soc *soc;
> +};


[snip]

> +
> +static void mtk_hsdma_issue_vchan_pending(struct mtk_hsdma_device *hsdma,
> +					  struct mtk_hsdma_vchan *hvc)
> +{
> +	struct virt_dma_desc *vd, *vd2;
> +	int err;
> +
> +	lockdep_assert_held(&hvc->vc.lock);
> +
> +	list_for_each_entry_safe(vd, vd2, &hvc->vc.desc_issued, node) {
> +		struct mtk_hsdma_vdesc *hvd;
> +
> +		hvd = to_hsdma_vdesc(vd);
> +
> +		/* Map VD into PC and all VCs shares a single PC */
> +		err = mtk_hsdma_issue_pending_vdesc(hsdma, hsdma->pc, hvd);
> +
> +		/* Move VD from desc_issued to desc_hw_processing when entire
> +		 * VD is fit into available PDs. Otherwise, the uncompleted
> +		 * VDs would stay in list desc_issued and then restart the
> +		 * processing as soon as possible once underlying ring space
> +		 * got freed.
> +		 */

Please fix multi-line comment style.

> +		if (err == -ENOSPC)
> +			break;
> +
> +		/*
> +		 * The extra list desc_hw_processing is used because
> +		 * hardware can't provide sufficient information allowing us
> +		 * to know what VDs are still working on the underlying ring.
> +		 * Through the additional list, it can help us to implement
> +		 * terminate_all, residue calculation and such thing needed
> +		 * to know detail descriptor status on the hardware.
> +		 */
> +		list_move_tail(&vd->node, &hvc->desc_hw_processing);
> +	}
> +}
> +
> +static void mtk_hsdma_free_rooms_in_ring(struct mtk_hsdma_device *hsdma)
> +{
> +	struct mtk_hsdma_vchan *hvc;
> +	struct mtk_hsdma_pdesc *rxd;
> +	struct mtk_hsdma_vdesc *hvd;
> +	struct mtk_hsdma_pchan *pc;
> +	struct mtk_hsdma_cb *cb;
> +	__le32 desc2;
> +	u32 status;
> +	u16 next;
> +	int i;
> +
> +	pc = hsdma->pc;
> +
> +	/* Read IRQ status */
> +	status = mtk_dma_read(hsdma, MTK_HSDMA_INT_STATUS);
> +
> +	/*
> +	 * Ack the pending IRQ all to let hardware know software is handling
> +	 * those finished physical descriptors. Otherwise, the hardware would
> +	 * keep the used IRQ line in certain trigger state.
> +	 */
> +	mtk_dma_write(hsdma, MTK_HSDMA_INT_STATUS, status);
> +
> +	while (1) {
> +		next = MTK_HSDMA_NEXT_DESP_IDX(pc->ring.cur_rptr,
> +					       MTK_DMA_SIZE);
> +		rxd = &pc->ring.rxd[next];
> +		/*
> +		 * If MTK_HSDMA_DESC_DDONE is no specified, that means data
> +		 * moving for the PD is still under going.
> +		 */
> +		desc2 = READ_ONCE(rxd->desc2);
> +		if (!(desc2 & hsdma->soc->ddone))
> +			break;
> +
> +		cb = &pc->ring.cb[next];
> +		if (unlikely(!cb->vd)) {
> +			dev_err(hsdma2dev(hsdma), "cb->vd cannot be null\n");
> +			break;
> +		}
> +
> +		/* Update residue of VD the associated PD belonged to */
> +		hvd = to_hsdma_vdesc(cb->vd);
> +		hvd->residue -= MTK_HSDMA_DESC_PLEN_GET(rxd->desc2);
> +
> +		/* Complete VD until the relevant last PD is finished */
> +		if (IS_MTK_HSDMA_VDESC_FINISHED(cb->flag)) {
> +			hvc = to_hsdma_vchan(cb->vd->tx.chan);
> +
> +			spin_lock(&hvc->vc.lock);
> +			/* Remove VD from list desc_hw_processing */
> +			list_del(&cb->vd->node);
> +			/* Add VD into list desc_completed */
> +			vchan_cookie_complete(cb->vd);
> +
> +			if (hvc->issue_synchronize &&
> +			    list_empty(&hvc->desc_hw_processing)) {
> +				complete(&hvc->issue_completion);
> +				hvc->issue_synchronize = false;
> +			}
> +			spin_unlock(&hvc->vc.lock);
> +
> +			cb->flag = 0;
> +		}
> +
> +		cb->vd = 0;
> +
> +		/*
> +		 * Recycle the RXD with the helper WRITE_ONCE that can ensure
> +		 * data written into RAM would really happens.
> +		 */
> +		WRITE_ONCE(rxd->desc1, 0);
> +		WRITE_ONCE(rxd->desc2, 0);
> +		pc->ring.cur_rptr = next;
> +
> +		/* Release rooms */
> +		atomic_inc(&pc->nr_free);
> +	}
> +
> +	/* Ensure all changes indeed done before we're going on */
> +	wmb();
> +
> +	/* Update CPU pointer for those completed PDs */
> +	mtk_dma_write(hsdma, MTK_HSDMA_RX_CPU, pc->ring.cur_rptr);
> +
> +	/* ASAP handles pending VDs in all VCs after freeing some rooms */
> +	for (i = 0; i < hsdma->dma_requests; i++) {
> +		hvc = &hsdma->vc[i];
> +		spin_lock(&hvc->vc.lock);
> +		mtk_hsdma_issue_vchan_pending(hsdma, hvc);
> +		spin_unlock(&hvc->vc.lock);
> +	}
> +
> +	/* All completed PDs are cleaned up, so enable interrupt again */
> +	mtk_dma_set(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
> +}
> +
> +static irqreturn_t mtk_hsdma_irq(int irq, void *devid)
> +{
> +	struct mtk_hsdma_device *hsdma = devid;
> +
> +	/*
> +	 * Disable interrupt until all completed PDs are cleaned up in
> +	 * mtk_hsdma_free_rooms call.
> +	 */
> +	mtk_dma_clr(hsdma, MTK_HSDMA_INT_ENABLE, MTK_HSDMA_INT_RXDONE);
> +
> +	mtk_hsdma_free_rooms_in_ring(hsdma);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +struct virt_dma_desc *mtk_hsdma_find_active_desc(struct dma_chan *c,
> +						 dma_cookie_t cookie)
> +{
> +	struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
> +	struct virt_dma_desc *vd;
> +
> +	list_for_each_entry(vd, &hvc->desc_hw_processing, node)
> +		if (vd->tx.cookie == cookie)
> +			return vd;
> +
> +	list_for_each_entry(vd, &hvc->vc.desc_issued, node)
> +		if (vd->tx.cookie == cookie)
> +			return vd;
> +
> +	return NULL;
> +}
> +
> +static enum dma_status mtk_hsdma_tx_status(struct dma_chan *c,
> +					   dma_cookie_t cookie,
> +					   struct dma_tx_state *txstate)
> +{
> +	struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
> +	struct mtk_hsdma_vdesc *hvd;
> +	struct virt_dma_desc *vd;
> +	enum dma_status ret;
> +	unsigned long flags;
> +	size_t bytes = 0;
> +
> +	ret = dma_cookie_status(c, cookie, txstate);
> +	if (ret == DMA_COMPLETE || !txstate)
> +		return ret;
> +
> +	spin_lock_irqsave(&hvc->vc.lock, flags);
> +	vd = mtk_hsdma_find_active_desc(c, cookie);
> +	spin_unlock_irqrestore(&hvc->vc.lock, flags);
> +
> +	if (vd) {
> +		hvd = to_hsdma_vdesc(vd);
> +		bytes = hvd->residue;
> +	}
> +
> +	dma_set_residue(txstate, bytes);
> +
> +	return ret;
> +}
> +
> +static void mtk_hsdma_issue_pending(struct dma_chan *c)
> +{
> +	struct mtk_hsdma_device *hsdma = to_hsdma_dev(c);
> +	struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&hvc->vc.lock, flags);
> +
> +	if (vchan_issue_pending(&hvc->vc))
> +		mtk_hsdma_issue_vchan_pending(hsdma, hvc);
> +
> +	spin_unlock_irqrestore(&hvc->vc.lock, flags);
> +}
> +
> +static struct dma_async_tx_descriptor *
> +mtk_hsdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest,
> +			  dma_addr_t src, size_t len, unsigned long flags)
> +{
> +	struct mtk_hsdma_vdesc *hvd;
> +
> +	hvd = kzalloc(sizeof(*hvd), GFP_NOWAIT);
> +	if (!hvd)
> +		return NULL;
> +
> +	hvd->len = len;
> +	hvd->residue = len;
> +	hvd->src = src;
> +	hvd->dest = dest;
> +
> +	return vchan_tx_prep(to_virt_chan(c), &hvd->vd, flags);
> +}
> +
> +static int mtk_hsdma_free_inactive_desc(struct dma_chan *c, bool reuse_clr)
> +{
> +	struct virt_dma_chan *vc = to_virt_chan(c);
> +	unsigned long flags;
> +	LIST_HEAD(head);
> +
> +	/* Terminate pending descriptors that have previously been submitted

Begin multi-line comments with:
	/*
then real comments start on the next line.

> +	 * to the channel. However, the DMA engine doesn't provide any way to
> +	 * stop these descriptors being processed by hardware. The only way is
> +	 * just waiting until these descriptors are all processing done. Thus,
> +	 * users must synchronize to the DMA channel termination to guarantee
> +	 * that all transfers for previously issued descriptors have stopped.
> +	 */
> +	spin_lock_irqsave(&vc->lock, flags);
> +	list_splice_tail_init(&vc->desc_allocated, &head);
> +	list_splice_tail_init(&vc->desc_submitted, &head);
> +	list_splice_tail_init(&vc->desc_issued, &head);
> +
> +	if (reuse_clr) {
> +		struct virt_dma_desc *vd;
> +
> +		list_for_each_entry(vd, &head, node)
> +			dmaengine_desc_clear_reuse(&vd->tx);
> +	}
> +	spin_unlock_irqrestore(&vc->lock, flags);
> +
> +	/* At the point, we don't expect users put descriptor into VC again */
> +	vchan_dma_desc_free_list(vc, &head);
> +
> +	return 0;
> +}
> +
> +static int mtk_hsdma_terminate_all(struct dma_chan *c)
> +{
> +	mtk_hsdma_free_inactive_desc(c, false);
> +
> +	return 0;
> +}
> +
> +static void mtk_hsdma_synchronize(struct dma_chan *c)
> +{
> +	struct mtk_hsdma_vchan *hvc = to_hsdma_vchan(c);
> +	bool sync_needed = false;
> +
> +	/*
> +	 * Once issue_synchronize is being set, which means once the hardware
> +	 * consumes all descriptors for the channel in the ring, the
> +	 * synchronization must be be notified immediately it is completed.
> +	 */
> +	spin_lock(&hvc->vc.lock);
> +	if (!list_empty(&hvc->desc_hw_processing)) {
> +		hvc->issue_synchronize = true;
> +		sync_needed = true;
> +	}
> +	spin_unlock(&hvc->vc.lock);
> +
> +	if (sync_needed)
> +		wait_for_completion(&hvc->issue_completion);
> +	/*
> +	 * At the point, we expect that all remaining descriptors in the ring
> +	 * for the channel should be all processing done.
> +	 */
> +	WARN_ONCE(!list_empty(&hvc->desc_hw_processing),
> +		  "Desc pending still in list desc_hw_processing\n");
> +
> +	/* Free all descriptors in list desc_completed */
> +	vchan_synchronize(&hvc->vc);
> +
> +	WARN_ONCE(!list_empty(&hvc->vc.desc_completed),
> +		  "Desc pending still in list desc_completed\n");
> +}


thanks,
-- 
~Randy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux