This patch updates the sound node of the exynos5433-tm2 board and adds clock tree configuration in order to support HDMI sound. Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> --- Changes since v1: - dropped unnecessary assigned-clock* properties for AUD PLL in cmu_top node, - changed default AUD PLL frequency so it is withing recommended 252...400 MHz range. --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 60 ++++++++++++++++++++-- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 + 2 files changed, 57 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index a77462da4a36..5599f1941c64 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> / { aliases { @@ -112,8 +113,8 @@ sound { compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; @@ -216,9 +217,56 @@ status = "okay"; }; +#define TM2_DEF_AUD_PLL_RATE 393216003U + &cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, + <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_SCLK_AUDIO0>, + <&cmu_top CLK_MOUT_SCLK_AUDIO1>, + <&cmu_top CLK_MOUT_SCLK_SPDIF>, + + <&cmu_aud CLK_DIV_AUD_CA5>, + <&cmu_aud CLK_DIV_ACLK_AUD>, + <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, + <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, + <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, + <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, + <&cmu_aud CLK_DIV_SCLK_AUD_UART>, + <&cmu_top CLK_DIV_SCLK_AUDIO0>, + <&cmu_top CLK_DIV_SCLK_AUDIO1>, + <&cmu_top CLK_DIV_SCLK_PCM1>, + <&cmu_top CLK_DIV_SCLK_I2S1>; + + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_SCLK_AUDIO0>; + + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <((TM2_DEF_AUD_PLL_RATE / 2) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 6) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 12) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 8) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 192) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 16) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 2) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 16) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 4) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 192) + 1)>, + <((TM2_DEF_AUD_PLL_RATE / 8) + 1)>; +}; + +&i2s1 { + assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; }; &cmu_fsys { @@ -838,6 +886,10 @@ status = "okay"; }; +&i2s1 { + status = "okay"; +}; + &mshc_0 { status = "okay"; mmc-hs200-1_8v; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 2b73bd86bc56..c0231d077fa6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -969,6 +969,7 @@ ddc = <&hsi2c_11>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; status = "disabled"; }; -- 2.14.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html