Re: [PATCH v6 1/3] irqchip/gic-v3-its: add ability to save/restore ITS state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Derek,

On Wed, Feb 07, 2018 at 06:36:46PM -0800, Derek Basehore wrote:
> Some platforms power off GIC logic in suspend, so we need to
> save/restore state. The distributor and redistributor registers need
> to be handled in platform code due to access permissions on those
> registers, but the ITS registers can be restored in the kernel.
> 
> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> ---
>  drivers/irqchip/irq-gic-v3-its.c | 103 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 06f025fd5726..35ad48f51dfa 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -33,6 +33,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/percpu.h>
>  #include <linux/slab.h>
> +#include <linux/syscore_ops.h>
>  
>  #include <linux/irqchip.h>
>  #include <linux/irqchip/arm-gic-v3.h>
> @@ -46,6 +47,7 @@
>  #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING		(1ULL << 0)
>  #define ITS_FLAGS_WORKAROUND_CAVIUM_22375	(1ULL << 1)
>  #define ITS_FLAGS_WORKAROUND_CAVIUM_23144	(1ULL << 2)
> +#define ITS_FLAGS_SAVE_SUSPEND_STATE		(1ULL << 3)
>  
>  #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING	(1 << 0)
>  
> @@ -101,6 +103,8 @@ struct its_node {
>  	struct its_collection	*collections;
>  	struct fwnode_handle	*fwnode_handle;
>  	u64			(*get_msi_base)(struct its_device *its_dev);
> +	u64			cbaser_save;
> +	u32			ctlr_save;
>  	struct list_head	its_device_list;
>  	u64			flags;
>  	unsigned long		list_nr;
> @@ -3042,6 +3046,100 @@ static void its_enable_quirks(struct its_node *its)
>  	gic_enable_quirks(iidr, its_quirks, its);
>  }
>  
> +static int its_save_disable(void)
> +{
> +	struct its_node *its;
> +	int err = 0;
> +
> +	spin_lock(&its_lock);
> +	list_for_each_entry(its, &its_nodes, entry) {
> +		void __iomem *base;
> +
> +		if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> +			continue;
> +
> +		base = its->base;
> +		its->ctlr_save = readl_relaxed(base + GITS_CTLR);
> +		err = its_force_quiescent(base);
> +		if (err) {
> +			pr_err("ITS failed to quiesce\n");

Isn't this a case where it was suggested to print the PA? Also, printing
the error code never hurts. Like:

			pr_err("ITS@%pa: failed to quiesce: %d\n",
			       &its->phys_base, err);

> +			writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> +			goto err;
> +		}
> +
> +		its->cbaser_save = gits_read_cbaser(base + GITS_CBASER);
> +	}
> +
> +err:
> +	if (err) {
> +		list_for_each_entry_continue_reverse(its, &its_nodes, entry) {
> +			void __iomem *base;
> +
> +			if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> +				continue;
> +
> +			base = its->base;
> +			writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> +		}
> +	}
> +	spin_unlock(&its_lock);
> +
> +	return err;
> +}
> +
> +static void its_restore_enable(void)
> +{
> +	struct its_node *its;
> +
> +	spin_lock(&its_lock);
> +	list_for_each_entry(its, &its_nodes, entry) {
> +		void __iomem *base;
> +		int i;
> +
> +		if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> +			continue;
> +
> +		base = its->base;
> +
> +		/*
> +		 * Make sure that the ITS is disabled. If it fails to quiesce,
> +		 * don't restore it since writing to CBASER or BASER<n>
> +		 * registers is undefined according to the GIC v3 ITS
> +		 * Specification.
> +		 */
> +		if (its_force_quiescent(base)) {
> +			pr_err("ITS(%p): failed to quiesce on resume\n", base);

I think Marc was requesting the PA, not the VA. The VA isn't really very
useful. Also, might as well log with similar style to the existing logs
(ITS@xxx), and log the error code:

			pr_err("ITS@%pa: failed to quiesce on resume: %d\n",
			       &its->phys_base, ret);

Brian

> +			continue;
> +		}
> +
> +		gits_write_cbaser(its->cbaser_save, base + GITS_CBASER);
> +
> +		/*
> +		 * Writing CBASER resets CREADR to 0, so make CWRITER and
> +		 * cmd_write line up with it.
> +		 */
> +		its->cmd_write = its->cmd_base;
> +		gits_write_cwriter(0, base + GITS_CWRITER);
> +
> +		/* Restore GITS_BASER from the value cache. */
> +		for (i = 0; i < GITS_BASER_NR_REGS; i++) {
> +			struct its_baser *baser = &its->tables[i];
> +
> +			if (!(baser->val & GITS_BASER_VALID))
> +				continue;
> +
> +			its_write_baser(its, baser, baser->val);
> +		}
> +		writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> +	}
> +	spin_unlock(&its_lock);
> +}
> +
> +static struct syscore_ops its_syscore_ops = {
> +	.suspend = its_save_disable,
> +	.resume = its_restore_enable,
> +};
> +
>  static int its_init_domain(struct fwnode_handle *handle, struct its_node *its)
>  {
>  	struct irq_domain *inner_domain;
> @@ -3261,6 +3359,9 @@ static int __init its_probe_one(struct resource *res,
>  		ctlr |= GITS_CTLR_ImDe;
>  	writel_relaxed(ctlr, its->base + GITS_CTLR);
>  
> +	if (fwnode_property_present(handle, "reset-on-suspend"))
> +		its->flags |= ITS_FLAGS_SAVE_SUSPEND_STATE;
> +
>  	err = its_init_domain(handle, its);
>  	if (err)
>  		goto out_free_tables;
> @@ -3515,5 +3616,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
>  		}
>  	}
>  
> +	register_syscore_ops(&its_syscore_ops);
> +
>  	return 0;
>  }
> -- 
> 2.16.0.rc1.238.g530d649a79-goog
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux