[PATCH v4 4/5] ARM: dts: bcm2835: make the firmware node into a bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This allows adding devices for which the firmware exposes control interface
via the mailbox. An example of such device is the GPIO expander.

Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
---
v4: New patch in this series
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index e36c392a2b8f..0198bd46ef7c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -18,7 +18,9 @@
 
 	soc {
 		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware";
+			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			#address-cells = <0>;
+			#size-cells = <0>;
 			mboxes = <&mailbox>;
 		};
 
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux