[PATCH] media: stm32-dcmi: rework overrun/error case

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do not stop/restart dma on overrun or errors.
Dma will be restarted on current frame transfer
completion. Frame transfer completion is ensured
even if overrun or error occurs by DCMI continuous
capture mode which restarts data transfer at next
frame sync.
Do no warn on overrun while in irq thread, this slows down
system and lead to more overrun errors. Use a counter
instead and log errors at stop streaming.

Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 4a75756..ab555d4 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -160,6 +160,7 @@ struct stm32_dcmi {
 	dma_cookie_t			dma_cookie;
 	u32				misr;
 	int				errors_count;
+	int				overrun_count;
 	int				buffers_count;
 };
 
@@ -373,23 +374,9 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
 	}
 
 	if ((dcmi->misr & IT_OVR) || (dcmi->misr & IT_ERR)) {
-		/*
-		 * An overflow or an error has been detected,
-		 * stop current DMA transfert & restart it
-		 */
-		dev_warn(dcmi->dev, "%s: Overflow or error detected\n",
-			 __func__);
-
 		dcmi->errors_count++;
-		dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
-
-		spin_unlock_irq(&dcmi->irqlock);
-		dmaengine_terminate_all(dcmi->dma_chan);
-
-		if (dcmi_start_capture(dcmi))
-			dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
-				__func__);
-		return IRQ_HANDLED;
+		if (dcmi->misr & IT_OVR)
+			dcmi->overrun_count++;
 	}
 
 	spin_unlock_irq(&dcmi->irqlock);
@@ -574,6 +561,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	dcmi->sequence = 0;
 	dcmi->errors_count = 0;
+	dcmi->overrun_count = 0;
 	dcmi->buffers_count = 0;
 	dcmi->active = NULL;
 
@@ -684,8 +672,14 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
 
 	clk_disable(dcmi->mclk);
 
-	dev_dbg(dcmi->dev, "Stop streaming, errors=%d buffers=%d\n",
-		dcmi->errors_count, dcmi->buffers_count);
+	if (dcmi->errors_count)
+		dev_warn(dcmi->dev, "Some errors found while streaming: errors=%d (overrun=%d), buffers=%d\n",
+			 dcmi->errors_count, dcmi->overrun_count,
+			 dcmi->buffers_count);
+	dev_dbg(dcmi->dev, "Stop streaming, errors=%d (overrun=%d), buffers=%d\n",
+		dcmi->errors_count, dcmi->overrun_count,
+		dcmi->buffers_count);
+
 }
 
 static const struct vb2_ops dcmi_video_qops = {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux