From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxx>
Open coding the counting of elements in a dt-property is abstracted by the newly
introduced of_property_count_uXX_elems functions. Additionally the raw iteration
over the states element exposes the endian conversion and dtb-format details,
which according to Mark Rutland "would be nice to limit [...] to of_ helper
functions".
Thus change ti-abb-regulator to use the helper for element counting and
of_property_read_u32_index for retrieval of individual values.
This makes it possible to remove the raw access to the property entirely.
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxx>
---
drivers/regulator/ti-abb-regulator.c | 43 ++++++++++++++++------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index a97d0c5..804c83a 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -507,32 +507,24 @@ static int ti_abb_init_table(struct device *dev, struct ti_abb *abb,
struct regulator_init_data *rinit_data)
{
struct ti_abb_info *info;
- const struct property *prop;
- const __be32 *abb_info;
const u32 num_values = 6;
char *pname = "ti,abb_info";
- u32 num_entries, i;
+ u32 i;
unsigned int *volt_table;
- int min_uV = INT_MAX, max_uV = 0;
+ int num_entries, min_uV = INT_MAX, max_uV = 0;
struct regulation_constraints *c = &rinit_data->constraints;
- prop = of_find_property(dev->of_node, pname, NULL);
- if (!prop) {
- dev_err(dev, "No '%s' property?\n", pname);
- return -ENODEV;
- }
-
- if (!prop->value) {
- dev_err(dev, "Empty '%s' property?\n", pname);
- return -ENODATA;
- }
-
/*
* Each abb_info is a set of n-tuple, where n is num_values, consisting
* of voltage and a set of detection logic for ABB information for that
* voltage to apply.
*/
- num_entries = prop->length / sizeof(u32);
+ num_entries = of_property_count_u32_elems(dev->of_node, pname);
+ if (num_entries < 0) {
+ dev_err(dev, "No '%s' property?\n", pname);
+ return -ENODEV;
+ }
+
if (!num_entries || (num_entries % num_values)) {
dev_err(dev, "All '%s' list entries need %d vals\n", pname,
num_values);
@@ -561,18 +553,23 @@ static int ti_abb_init_table(struct device *dev, struct ti_abb *abb,
/* We do not know where the OPP voltage is at the moment */
abb->current_info_idx = -EINVAL;
- abb_info = prop->value;
for (i = 0; i < num_entries; i++, info++, volt_table++) {
u32 efuse_offset, rbb_mask, fbb_mask, vset_mask;
u32 efuse_val;
/* NOTE: num_values should equal to entries picked up here */
- *volt_table = be32_to_cpup(abb_info++);
- info->opp_sel = be32_to_cpup(abb_info++);
- efuse_offset = be32_to_cpup(abb_info++);
- rbb_mask = be32_to_cpup(abb_info++);
- fbb_mask = be32_to_cpup(abb_info++);
- vset_mask = be32_to_cpup(abb_info++);
+ of_property_read_u32_index(dev->of_node, pname, i * num_values,
+ volt_table);
+ of_property_read_u32_index(dev->of_node, pname,
+ i * num_values + 1, &info->opp_sel);
+ of_property_read_u32_index(dev->of_node, pname,
+ i * num_values + 2, &efuse_offset);
+ of_property_read_u32_index(dev->of_node, pname,
+ i * num_values + 3, &rbb_mask);
+ of_property_read_u32_index(dev->of_node, pname,
+ i * num_values + 4, &fbb_mask);
+ of_property_read_u32_index(dev->of_node, pname,
+ i * num_values + 5, &vset_mask);
dev_dbg(dev,
"[%d]v=%d ABB=%d ef=0x%x rbb=0x%x fbb=0x%x vset=0x%x\n",
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
