On 07/02/18 01:41, Derek Basehore wrote:
> This adds functionality to resend the MAPC command to an ITS node on
> resume. If the ITS is powered down during suspend and the collections
> are not backed by memory, the ITS will lose that state. This just sets
> up the known state for the collections after the ITS is restored.
>
> This is enabled via the reset-on-suspend flag in the DTS for an ITS
> that has a non-zero number of collections stored in it.
>
> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> ---
> drivers/irqchip/irq-gic-v3-its.c | 80 ++++++++++++++++++++------------------
> include/linux/irqchip/arm-gic-v3.h | 1 +
> 2 files changed, 43 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 5e63635e2a7b..dd6cd6e68ed0 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -1942,52 +1942,53 @@ static void its_cpu_init_lpis(void)
> dsb(sy);
> }
>
> -static void its_cpu_init_collection(void)
> +static void its_cpu_init_collection(struct its_node *its)
> {
> - struct its_node *its;
> - int cpu;
> -
> - spin_lock(&its_lock);
> - cpu = smp_processor_id();
> -
> - list_for_each_entry(its, &its_nodes, entry) {
> - u64 target;
> + int cpu = smp_processor_id();
> + u64 target;
>
> - /* avoid cross node collections and its mapping */
> - if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
> - struct device_node *cpu_node;
> + /* avoid cross node collections and its mapping */
> + if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
> + struct device_node *cpu_node;
>
> - cpu_node = of_get_cpu_node(cpu, NULL);
> - if (its->numa_node != NUMA_NO_NODE &&
> - its->numa_node != of_node_to_nid(cpu_node))
> - continue;
> - }
> + cpu_node = of_get_cpu_node(cpu, NULL);
> + if (its->numa_node != NUMA_NO_NODE &&
> + its->numa_node != of_node_to_nid(cpu_node))
> + return;
> + }
>
> + /*
> + * We now have to bind each collection to its target
> + * redistributor.
> + */
> + if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
> /*
> - * We now have to bind each collection to its target
> + * This ITS wants the physical address of the
> * redistributor.
> */
> - if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
> - /*
> - * This ITS wants the physical address of the
> - * redistributor.
> - */
> - target = gic_data_rdist()->phys_base;
> - } else {
> - /*
> - * This ITS wants a linear CPU number.
> - */
> - target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
> - target = GICR_TYPER_CPU_NUMBER(target) << 16;
> - }
> + target = gic_data_rdist()->phys_base;
> + } else {
> + /* This ITS wants a linear CPU number. */
> + target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
> + target = GICR_TYPER_CPU_NUMBER(target) << 16;
> + }
>
> - /* Perform collection mapping */
> - its->collections[cpu].target_address = target;
> - its->collections[cpu].col_id = cpu;
> + /* Perform collection mapping */
> + its->collections[cpu].target_address = target;
> + its->collections[cpu].col_id = cpu;
>
> - its_send_mapc(its, &its->collections[cpu], 1);
> - its_send_invall(its, &its->collections[cpu]);
> - }
> + its_send_mapc(its, &its->collections[cpu], 1);
> + its_send_invall(its, &its->collections[cpu]);
> +}
> +
> +static void its_cpu_init_collections(void)
> +{
> + struct its_node *its;
> +
> + spin_lock(&its_lock);
> +
> + list_for_each_entry(its, &its_nodes, entry)
> + its_cpu_init_collection(its);
>
> spin_unlock(&its_lock);
> }
> @@ -3127,6 +3128,9 @@ static void its_restore_enable(void)
> its_write_baser(its, baser, baser->val);
> }
> writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> +
> + if (GITS_TYPER_HWCOLLCNT(gic_read_typer(base + GITS_TYPER)) > 0)
> + its_cpu_init_collection(its);
This isn't correct. Think of a system where half the collections are in
HW, and the other half memory based (nothing in the spec forbids this).
You must evaluate the CID of each collection and replay the MAPC *only*
if it falls into the range [0..HCC-1]. The memory-based collections are
already mapped, and remapping an already mapped collection requires
extra care (see MAPC and the UNPREDICTABLE behaviour when V=1), so don't
go there.
> }
> spin_unlock(&its_lock);
> }
> @@ -3393,7 +3397,7 @@ int its_cpu_init(void)
> return -ENXIO;
> }
> its_cpu_init_lpis();
> - its_cpu_init_collection();
> + its_cpu_init_collections();
> }
>
> return 0;
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> index c00c4c33e432..c9c33b91a1f1 100644
> --- a/include/linux/irqchip/arm-gic-v3.h
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -313,6 +313,7 @@
> #define GITS_TYPER_DEVBITS(r) ((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
> #define GITS_TYPER_PTA (1UL << 19)
> #define GITS_TYPER_HWCOLLCNT_SHIFT 24
> +#define GITS_TYPER_HWCOLLCNT(r) (((r) >> GITS_TYPER_HWCOLLCNT_SHIFT) & 0xff)
> #define GITS_TYPER_VMOVP (1ULL << 37)
>
> #define GITS_IIDR_REV_SHIFT 12
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
