On 02/06/2018 09:27 PM, Tim Harvey wrote:
> Add support for the TDA1997x HDMI receivers.
>
> Cc: Hans Verkuil <hverkuil@xxxxxxxxx>
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> ---
<snip>
> +static int tda1997x_get_dv_timings_cap(struct v4l2_subdev *sd,
> + struct v4l2_dv_timings_cap *cap)
> +{
> + if (cap->pad != TDA1997X_PAD_SOURCE)
> + return -EINVAL;
> +
> + *cap = tda1997x_dv_timings_cap;
> + return 0;
> +}
> +
> +static int tda1997x_enum_dv_timings(struct v4l2_subdev *sd,
> + struct v4l2_enum_dv_timings *timings)
> +{
> + if (timings->pad != TDA1997X_PAD_SOURCE)
> + return -EINVAL;
> +
> + return v4l2_enum_dv_timings_cap(timings, &tda1997x_dv_timings_cap,
> + NULL, NULL);
> +}
You shouldn't need this pad test: it's done in the v4l2-subdev.c core code
already. But please double-check :-)
Can you post the output of the v4l2-compliance test? I'm curious to see it.
Can you also try to run v4l2-compliance -m /dev/mediaX? That also tests
whether the right entity types are set (note: testing for that should
also happen in the subdev compliance test, but I haven't done that yet).
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
