Tegra210 has a very similar CPU clocking scheme than Tegra124. So add support in this driver. Also allow for the case where the CPU voltage is controlled directly by the DFLL rather than by a separate regulator object. Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx> --- drivers/cpufreq/tegra124-cpufreq.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c index 4353025..f8e01a8 100644 --- a/drivers/cpufreq/tegra124-cpufreq.c +++ b/drivers/cpufreq/tegra124-cpufreq.c @@ -64,7 +64,8 @@ static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv) { clk_set_parent(priv->cpu_clk, priv->pllp_clk); clk_disable_unprepare(priv->dfll_clk); - regulator_sync_voltage(priv->vdd_cpu_reg); + if (priv->vdd_cpu_reg) + regulator_sync_voltage(priv->vdd_cpu_reg); clk_set_parent(priv->cpu_clk, priv->pllx_clk); } @@ -89,10 +90,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) return -ENODEV; priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu"); - if (IS_ERR(priv->vdd_cpu_reg)) { - ret = PTR_ERR(priv->vdd_cpu_reg); - goto out_put_np; - } + if (IS_ERR(priv->vdd_cpu_reg) != -EPROBE_DEFER) + priv->vdd_cpu_reg = NULL; + else + return -EPROBE_DEFER; priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); if (IS_ERR(priv->cpu_clk)) { @@ -148,7 +149,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) clk_put(priv->cpu_clk); out_put_vdd_cpu_reg: regulator_put(priv->vdd_cpu_reg); -out_put_np: of_node_put(np); return ret; @@ -181,7 +181,8 @@ static int __init tegra_cpufreq_init(void) int ret; struct platform_device *pdev; - if (!of_machine_is_compatible("nvidia,tegra124")) + if (!(of_machine_is_compatible("nvidia,tegra124") + || of_machine_is_compatible("nvidia,tegra210"))) return -ENODEV; /* -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html