[PATCH v2 1/2] of/gpio: Define OF_GPIO_OPEN_DRAIN and OF_GPIO_OPEN_SOURCE flags.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: David Daney <david.daney@xxxxxxxxxx>

When we have a GPIO pin connected to an open-drain network, we want a
standard way of specifying this in the device tree.  So we choose bit
1 of the flag field to indicate open drain.

A typical use case would be something like:

	enum of_gpio_flags f;
	.
	.
	.
	reset_gpio = of_get_named_gpio_flags(node, "reset", 0, &f);
	.
	.
	.
	ret = gpio_request_one(reset_gpio,
		(f & OF_GPIO_OPEN_DRAIN) ? GPIOF_OPEN_DRAIN : 0,
		 "reset");
	.
	.
	.
	gpio_direction_output(reset_gpio, 1);
	gpio_set_value(reset_gpio, 0);
	msleep(20);
	gpio_set_value(reset_gpio, 1);
	.
	.
	.

Since the same arguments hold for open-source configurations, add a
definition for OF_GPIO_OPEN_SOURCE as well.

Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
 include/linux/of_gpio.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index f14123a..cfacf5875 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -30,6 +30,8 @@ struct device_node;
  */
 enum of_gpio_flags {
 	OF_GPIO_ACTIVE_LOW = 0x1,
+	OF_GPIO_OPEN_DRAIN = 0x2,
+	OF_GPIO_OPEN_SOURCE = 0x4,
 };
 
 #ifdef CONFIG_OF_GPIO
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux