On Mon, Jan 29, 2018 at 09:12:53PM +0800, Phil Reid wrote:
> Add binding documentation for Analog Devices AD5272 and AD5274 digital
> potentiometer devices.
>
> Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
> ---
> .../bindings/iio/potentiometer/ad5272.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
> new file mode 100644
> index 0000000..11e804c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
> @@ -0,0 +1,27 @@
> +* Analog Devices AD5272 digital potentiometer driver
Bindings describe h/w not drivers.
> +
> +The node for this driver must be a child node of a I2C controller, hence
> +all mandatory properties for your controller must be specified. See directory:
> +
> + Documentation/devicetree/bindings/i2c
> +
> +for more details.
> +
> +Required properties:
> + - compatible: Must be one of the following, depending on the model:
> + adi,ad5272-020
> + adi,ad5272-050
> + adi,ad5272-100
> + adi,ad5274-020
> + adi,ad5274-100
> +
> +Optional properties:
> + - reset-gpios: GPIO specification for the RESET input. This is an
> + active low signal to the PCA953x.
> +
> +Example:
> +ad5272: ad5272@2f {
potentiometer@2f
Probably a node name we need to add to the spec.
> + reg = <0x2F>;
> + compatible = "adi,ad5272-020";
> + reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
> +};
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
