On Thu, Feb 01, 2018 at 07:31:24PM +0100, Lucas Stach wrote: > This adds the basic DTS for the i.MX8MQ. > For now only the following peripherals are supported: > - IOMUXC (pin controller) > - CCM (clock controller) > - GPIO > - UART > - uSDHC (SD/eMMC controller) > - FEC (ethernet controller) > - i2c > > This is enough to get a very basic board support up and running. > > One known limitation is that the driver for the GPC interrupt > controller is still missing, rendering the CPU sleep states unusable > as there is nothing waking them up anymore. This will be fixed in > due course. > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > --- > v2: > - move to freescale folder > - change compatibles to "fsl" vendor prefix > - remove unnecessary newlines > - move status property to be the last in all node > - remove imx21 compatibles from UART nodes > - document compatible > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h | 623 +++++++++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 411 ++++++++++++++++ > 3 files changed, 1038 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq.dtsi Reviewed-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
