On Fri, Feb 02, 2018 at 04:43:51PM +0100, Maciej Purski wrote:
> Camera, Fimc, mct and sysram labels are defined in exynos4210.dtsi. Use
> them in exynos4210-universal_c210.dts instead of full names.
>
> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4210-universal_c210.dts | 115 ++++++++++++------------
> 1 file changed, 58 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> index 21fff7c..0ac619d 100644
> --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> @@ -28,24 +28,6 @@
> stdout-path = &serial_2;
> };
>
> - sysram@2020000 {
> - smp-sysram@0 {
> - status = "disabled";
> - };
> -
> - smp-sysram@5000 {
> - compatible = "samsung,exynos4210-sysram";
> - reg = <0x5000 0x1000>;
> - };
> -
> - smp-sysram@1f000 {
> - status = "disabled";
> - };
> - };
> -
> - mct@10050000 {
> - compatible = "none";
> - };
>
> fixed-rate-clocks {
> xxti {
> @@ -173,45 +155,6 @@
> };
> };
>
> - camera {
> - status = "okay";
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <>;
> -
> - fimc_0: fimc@11800000 {
> - status = "okay";
> - assigned-clocks = <&clock CLK_MOUT_FIMC0>,
> - <&clock CLK_SCLK_FIMC0>;
> - assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> - assigned-clock-rates = <0>, <160000000>;
> - };
> -
> - fimc_1: fimc@11810000 {
> - status = "okay";
> - assigned-clocks = <&clock CLK_MOUT_FIMC1>,
> - <&clock CLK_SCLK_FIMC1>;
> - assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> - assigned-clock-rates = <0>, <160000000>;
> - };
> -
> - fimc_2: fimc@11820000 {
> - status = "okay";
> - assigned-clocks = <&clock CLK_MOUT_FIMC2>,
> - <&clock CLK_SCLK_FIMC2>;
> - assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> - assigned-clock-rates = <0>, <160000000>;
> - };
> -
> - fimc_3: fimc@11830000 {
> - status = "okay";
> - assigned-clocks = <&clock CLK_MOUT_FIMC3>,
> - <&clock CLK_SCLK_FIMC3>;
> - assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> - assigned-clock-rates = <0>, <160000000>;
> - };
> - };
> -
> hdmi_en: voltage-regulator-hdmi-5v {
> compatible = "regulator-fixed";
> regulator-name = "HDMI_5V";
> @@ -250,6 +193,38 @@
> vbus-supply = <&safeout1_reg>;
> };
>
> +&fimc_0 {
> + status = "okay";
> + assigned-clocks = <&clock CLK_MOUT_FIMC0>,
> + <&clock CLK_SCLK_FIMC0>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_1 {
> + status = "okay";
> + assigned-clocks = <&clock CLK_MOUT_FIMC1>,
> + <&clock CLK_SCLK_FIMC1>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_2 {
> + status = "okay";
> + assigned-clocks = <&clock CLK_MOUT_FIMC2>,
> + <&clock CLK_SCLK_FIMC2>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> +&fimc_3 {
> + status = "okay";
> + assigned-clocks = <&clock CLK_MOUT_FIMC3>,
> + <&clock CLK_SCLK_FIMC3>;
> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
> + assigned-clock-rates = <0>, <160000000>;
> +};
> +
> &fimd {
> pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
> pinctrl-names = "default";
> @@ -497,10 +472,21 @@
> };
> };
>
> +&camera {
Can you put it in alphabetical order?
Best regards,
Krzysztof
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <>;
> +};
> +
> &i2c_8 {
> status = "okay";
> };
>
> +&mct {
> + compatible = "none";
> +};
> +
> &mdma1 {
> reg = <0x12840000 0x1000>;
> };
> @@ -579,3 +565,18 @@
> /delete-property/dmas;
> /delete-property/dma-names;
> };
> +
> +&sysram {
> + smp-sysram@0 {
> + status = "disabled";
> + };
> +
> + smp-sysram@5000 {
> + compatible = "samsung,exynos4210-sysram";
> + reg = <0x5000 0x1000>;
> + };
> +
> + smp-sysram@1f000 {
> + status = "disabled";
> + };
> +};
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
