The V3s is just a differently packaged version of the V3 chip, which has
a MAC with the same capability with H3. The V3s just doesn't wire out
the external MII/RMII/RGMII bus. (V3 wired out it).
Drop the compatible string of V3s in the dwmac-sun8i driver, and add a
V3 compatible string, which has all capabilities.
Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 10 +++++-----
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 10 ++++++----
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 3d6d5fa0c4d5..158124e8ee71 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -7,7 +7,7 @@ Required properties:
- compatible: must be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
- "allwinner,sun8i-v3s-emac"
+ "allwinner,sun8i-v3-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
- interrupts: interrupt for the device
@@ -23,7 +23,7 @@ Required properties:
- syscon: A phandle to the syscon of the SoC with one of the following
compatible string:
- allwinner,sun8i-h3-system-controller
- - allwinner,sun8i-v3s-system-controller
+ - allwinner,sun8i-v3-system-controller
- allwinner,sun50i-a64-system-controller
- allwinner,sun8i-a83t-system-controller
@@ -35,7 +35,7 @@ external PHY.
Optional properties for the following compatibles:
- "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
+ - "allwinner,sun8i-v3-emac":
- allwinner,leds-active-low: EPHY LEDs are active low
Required child node of emac:
@@ -51,7 +51,7 @@ of the mdio node. See phy.txt for the generic PHY bindings.
The following compatibles require that the emac node have a mdio-mux child
node called "mdio-mux":
- "allwinner,sun8i-h3-emac"
- - "allwinner,sun8i-v3s-emac":
+ - "allwinner,sun8i-v3-emac":
Required properties for the mdio-mux node:
- compatible = "allwinner,sun8i-h3-mdio-mux"
- mdio-parent-bus: a phandle to EMAC mdio
@@ -64,7 +64,7 @@ Required properties for the mdio-mux children node:
The following compatibles require a PHY node representing the integrated
PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
+ - "allwinner,sun8i-v3-emac":
Additional information regarding generic multiplexer properties can be found
at Documentation/devicetree/bindings/net/mdio-mux.txt
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a3fa65b1ca8e..fd0519cf27b9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -84,10 +84,12 @@ static const struct emac_variant emac_variant_h3 = {
.support_rgmii = true
};
-static const struct emac_variant emac_variant_v3s = {
+static const struct emac_variant emac_variant_v3 = {
.default_syscon_value = 0x38000,
.soc_has_internal_phy = true,
- .support_mii = true
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true
};
static const struct emac_variant emac_variant_a83t = {
@@ -1074,8 +1076,8 @@ return ret;
static const struct of_device_id sun8i_dwmac_match[] = {
{ .compatible = "allwinner,sun8i-h3-emac",
.data = &emac_variant_h3 },
- { .compatible = "allwinner,sun8i-v3s-emac",
- .data = &emac_variant_v3s },
+ { .compatible = "allwinner,sun8i-v3-emac",
+ .data = &emac_variant_v3 },
{ .compatible = "allwinner,sun8i-a83t-emac",
.data = &emac_variant_a83t },
{ .compatible = "allwinner,sun50i-a64-emac",
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
